安装Skyeye,make 失败！请教解决方法？

lyfflhj

我在安装skyeye时, make过程中出错,出现
make[1]: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/mmalloc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/mmalloc'
make[1]: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/readline'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/readline'
make[1]: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim'
make[2]: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/common'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/common'
make[2]: Entering directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/arm'
make[2]: *** 没有指明目标并且找不到 makefile。 停止。
make[2]: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim/arm'
make[1]: *** [all] 错误 2
make[1]: Leaving directory `/opt/skyeye-cdrom/SkyEye/skyeye/skyeye/sim'
make: *** [all-sim] 错误 2

ksh

Before run "make" command, you need to run "make distclean" firstly.

lyfflhj

我安装的skyeye的版本是0。8。0的；按照README 的说明和你的指导：
按如下编译，但又通不过.
./configure --target=arm-elf --prefix=/usr/local
。。。。
make distclean
（下面是具体的信息）

make
（下面是具体的信息）

[root@localhost skyeye]# make distclean
。。。。。。
make[2]: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make[2]: *** 没有规则可以创建目标 distclean 停止
make[2]: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make[1]: *** [distclean] 错误2
make[1]: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim'make: *** [do-distclean] 错误1
[root@localhost skyeye]# make
make[1]: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim'
make[2]: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/common'
make[2]: *** 没有指明目标并且找不到makefile. 停止
make[2]: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/common'
make[2]: Entering directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make[2]: *** 没有指明目标并且找不到makefile. 停止
make[2]: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim/arm'
make[1]: *** [all] 错误 2
make[1]: Leaving directory `/root/Desktop/SkyEye-CDROM/SkyEye/skyeye/skyeye/sim'make: *** [all-sim错误 错误 2


可不可以具体地说一下整个安装过程？万分感谢！