怎么用make编译这个文件?(sis315显卡驱动)
sis315 for Linux的官方驱动，我从sis的官方站点下载的。在sis650主板（集成sis315）安装无误。1.cp sis_drv.o-410 /usr/X11R6/lib/modules/drivers/sis_drv.o
2.make sure /etc/X11/XF86Config file has the correct "driver" section.driver "sis"
3.startx.
为什么我执行第2步 不成功呢,说什么 sure 没这个 选项?
麻烦各位 帮帮我,我刚接触 linux 看看你的 /etc/X11/XF86Config
Section "Device"
....
Driver "sis" <-------- 这里是否是 sis
....
EndSectiion
//
startx 谢谢斑竹这么快就回复!!!
在我的 XF86Config 里是这样的
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by Xconfigurator:
Section "Device"
Identifier"AOpen PA45"
VendorName"Unknown"
BoardName "Unknown"
#VideoRam 32768
# Option "no_accel" # Use this if acceleration is causing problems
# Option "fifo_moderate"
# Option "fifo_conserv"
# Option "fifo_aggresive"
# Option "fast_vram"
# Option "pci_burst_on"
# Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!!
# Option "ext_eng_queue" # Turbo-queue. This can cause drawing
# errors, but gives some accel
# Insert Clocks lines here if appropriate
EndSection
另外我发现在这个目录下还有一个 XF86Config-4 文件,里面的内容是这样的:
.
.
.
Section "Monitor"
Identifier "CM777Z/CM787"
VendorName "Unknown"
ModelName"Unknown"
HorizSync 30 - 70
VertRefresh 50 - 100
Option "dpms"
EndSection
Section "Device"
Identifier "AOpen PA45"
Driver "sis"
BoardName "Unknown"
# Option "no_accel" # Use this if acceleration is causing problems
# Option "fifo_moderate"
# Option "fifo_conserv"
# Option "fifo_aggresive"
# Option "fast_vram"
# Option "pci_burst_on"
# Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!!
# Option "ext_eng_queue" # Turbo-queue. This can cause drawing
# errors, but gives some accel
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "AOpen PA45"
Monitor "CM777Z/CM787"
DefaultDepth 8
EndSection
Section "DRI"
Mode 0666
EndSection
由于我是第一次弄 Linux ,所以我用 Xconfigurator 瞎弄了好几次,数据可能已经不对了!
另外我的显卡在 WIN XP 里测出来是 SIS 315 显存 是 64M
我装的是 Red Hat Linux 7.2
请继续给予帮助!!!再次感谢!!! 我把 要改的地方 都改了,startx 黑屏了几秒 然后 又回到 字符状态了?这怎么办啊? :( 查我的帖子，有个非官方驱动的
Re: 怎么用make编译这个文件?(sis315显卡驱动)
sis315 for Linux的官方驱动，我从sis的官方站点下载的。在sis650主板（集成sis315）安装无误。1.cp sis_drv.o-410 /usr/X11R6/lib/modules/drivers/sis_drv.o
2.make sure /etc/X11/XF86Config file has the correct "driver" section.driver "sis"
3.startx.
为什么我执行第2步 不成功呢,说什么 sure 没这个 选项?
麻烦各位 帮帮我,我刚接触 linux
我觉得你应该先补习一下英语 你说的是这个吗?
http://www.winischhofer.net/linuxsisvga.shtml 我知道了, 第2行 是说 确定XF86Config文件里的driver这一行是否有"sis"，没有的话可能要自己手工改!
但 到底 怎么改呢? 我现在是 一头雾水 ! 把完整的XF86Config和XF86Config－4贴出来……
更新内核…… XF86Config 的内容如下:
# File generated by XConfigurator.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section.This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received.This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.This allows clients to receive these key events.
#DontZoom
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat500 5
# Let the server do the NumLock processing.This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds 1 2 3
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions"ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant""
# XkbOptions""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
ZAxisMapping 4 5
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier"CM777Z/CM787"
VendorName"Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30 - 70
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50 - 100
# Modes can be specified in two formats.A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512528592640 384385388404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512528592640 384385388404 -HSync -VSync
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640664760800 400409411450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640672 736 832 400401404445 -HSync +VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640672768864 480488494530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640664760800 480491493525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640680720864 480488491521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine"640x480" 31.5 640656720840 480481484500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640696752832 480481484509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline"800x600" 69.65800864928 1088 600604610640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800824896 1024 600601603625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800840968 1056 600601605628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800856976 1040 600637643666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline"800x600" 60.75800864928 1088 600616621657 -HSync -VSync
# 1024x480 for certain Vaios
Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.51024 1056 1248 1440768771781802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768771777806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768771777806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768784787823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.91024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864866885902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline"1152x864" 89.91152 1216 1472 1680 864868876892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline"1152x864" 92 1152 1208 1368 1474 864865875895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864864876908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864864876908
# 1280x960 @ 60 HzModeline "1280x960" 108 1280 1376 1488 1800 960 961 964 1000 +HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011+HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"181.75 1280 1312 1440 16961024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"110 1280 1328 1512 17121024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"126.5 1280 1312 1472 16961024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"135 1280 1312 1456 17121024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"135 1280 1312 1416 16641024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"157.51280 1344 1504 17281024 1025 1028 1072 +HSync +VSync
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050"129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050"151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050"162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050"184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"162 1600 1664 1856 21601200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"189 1600 1664 1856 21601200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"202.51600 1664 1856 21601200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"220 1600 1616 1808 20801200 1204 1207 1244 +HSync +VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440"230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440"250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320336384400 200204205225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320336384400 240245246262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320336384400 240244246262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400416448512 300301302312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400416480528 300301303314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400424488520 300319322333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480496536616 300301302312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480496576632 300301303314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480496576632 300301303314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480504584624 300319322333 Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by Xconfigurator:
Section "Device"
Identifier"AOpen PA45"
VendorName"Unknown"
BoardName "Unknown"
#VideoRam 32768
# Option "no_accel" # Use this if acceleration is causing problems
# Option "fifo_moderate"
# Option "fifo_conserv"
# Option "fifo_aggresive"
# Option "fast_vram"
# Option "pci_burst_on"
# Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!!
# Option "ext_eng_queue" # Turbo-queue. This can cause drawing
# errors, but gives some accel
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
# Use Device "Generic VGA" for Standard VGA 320x200x256
#Device "Generic VGA"
Device "AOpen PA45"
Monitor "CM777Z/CM787"
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "CM777Z/CM787"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "CM777Z/CM787"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
Driver "accel"
Device "AOpen PA45"
Monitor "CM777Z/CM787"
EndSection XF86Config-4 的内容如下:
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load"dbe" # Double-buffering
Load"GLcore" # OpenGL support
Load"dri" # Direct rendering infrastructure
Load"glx" # OpenGL X protocol interface
Load"extmod" # Misc. required extensions
Load"v4l" # Video4Linux
# Load"pex5" # PHIGS for X 3D environment (obsolete)
# Load"record" # X event recorder
# Load"xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load"freetype" # TrueType font handler
# Load"type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "off"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "CM777Z/CM787"
VendorName "Unknown"
ModelName"Unknown"
HorizSync 30 - 70
VertRefresh 50 - 100
Option "dpms"
EndSection
Section "Device"
Identifier "AOpen PA45"
Driver "sis"
BoardName "Unknown"
# Option "no_accel" # Use this if acceleration is causing problems
# Option "fifo_moderate"
# Option "fifo_conserv"
# Option "fifo_aggresive"
# Option "fast_vram"
# Option "pci_burst_on"
# Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!!
# Option "ext_eng_queue" # Turbo-queue. This can cause drawing
# errors, but gives some accel
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "AOpen PA45"
Monitor "CM777Z/CM787"
DefaultDepth 8
EndSection
Section "DRI"
Mode 0666
EndSection
-------------------------------------------------------------------------------------
另外我的内核 是 2.4.7 我已经快崩溃了!已经弄了好几天了!:(
我把机器拆了,看了显卡 是 AGP 的 上面写着 AG315P-64
可能是 AGP 315 64M 的意思吧!
有没有人能 指导 我一下,那个关于 SIS 的驱动我也下了,也拷贝到指定的位置了,然后 怎么配置 XF86Config 啊? 帮帮我吧!最后能具体点! 起作用的是XF86Config-4，把这一段注释掉：
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
把Driver "sis"改成Driver "vesa
升级内核 ，如果不想自己编译，下载rh9的内核装上 Thanks cobranail
还是不行!哎~~~~~~ 你的 XF86Config 和 XF86Config-4 文件中 Section "Screen" 和
DefaultDepth 和 SubSection "Display" 设置的太混乱了吧？
//
你的显示器和显卡在 windows 下可以达到什么模式 ？
//
你用 xf86cfg 配置一下， 如果可以起动 X ， 那么不要将 xf86cfg 建立的配置文件覆盖
/etc/X11/XF86Config 文件， 另外保存，再修改，主要改一下 那个 dirver
选项， 如果你的显示器可以上到 24bit + 1024x768 , 那么在
Section "Screen" 里添加
DefaultDepth 24
大致像这样：
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
//
主要是先让你的 X 起来：)
//
另外 rh7.2 setup 中不是有个 X 配置吗 ？ 你用过吗？
页:
[1]
2