做了USB猫的RPM，有要的就下
RT地址http://www.linuxfans.org/nuke/modules.php?name=Site_Downloads&op=geninfo&did=2569
要重新编译Kernel，必须是2.6.6的kernel，还要打补丁
补丁下载http://www.linuxfans.org/nuke/modules.php?name=Site_Downloads&op=geninfo&did=2485
建议以后MagicLinux做内核的时候把这几个选项勾上
Code maturity level options
[*] Prompt for development and/or incomplete code/drivers
Loadable module support
[*] Enable loadable module support
[*] Set version information on all module symbols
[*] Kernel module loader
Networking options
<*> Packet socket
<*> Unix domain sockets
[*] TCP/IP networking
[*] Asynchronous Transfer Mode (ATM)
USB support
<*> Support for USB
[*] Preliminary USB device filesystem
<M> UHCI
<M> OHCI
<M> Alcatel Speedtouch USB support (USB_SPEEDTOUCH)
Networking options
[*] Asynchronous Transfer Mode (ATM)
[*] Classical IP over ATM
Networking options
[M] RFC1483/2684 Bridged protocols
Network Device Support
<M > PPP (point-to-point protocol) support
<M> PPP Deflate compression
<M> PPP over Ethernet (EXPERIMENTAL)
Network Device Support
<M > PPP (point-to-point protocol) support
<M> PPP Deflate compression
<M> PPP over ATM
Processor type and features
[ ] Symmetric multi-processing support
Cryptographic API (CRYPTO)
<M>CRC32c CRC algorithm (CRYPTO_CRC32C)
Library routines
<M>CRC32c (Castagnoli, et al) Cyclic Redundancy-Check (LIBCRC32C)
还要把UB的补丁打上 Kernel 已经编译成RPM了
下载http://www.linuxsky.net/down/ftproot/incoming/lovewilliam/Kernel/kernel-2.6.6-4.i386.rpm
页:
[1]