[tc]天驰 发表于 2004-9-2 00:08:16

[求助]启动时死机怎么解决

好几个版本的Linux加载内核时都会死机:
硬件:P4 2.8C、MSI i865PE、256MB DDR X2、FX 5700 Ultra、SB Live!5.1特惠版(这个没问题)、ST 80GB、光驱两个、无线网卡
系统:已安装WindowsXP Pro正常运行,但Linux不能安装

死机时屏幕像是这样:
……
ide: Assuming 33 Mhz system bus speed for PIO modes:override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI:Enlabeling device 00:1f.1 (0005->0007)
PCI: Found IRQ 10 for device 00:1f.1
PCI: Shareing IRQ 10 with 00:1f.1
ICH5: chipest revision 2
ICH5: 100% mative mode on irq 10
      ide0:BM-DMA at 0xdc00-0xdc07,BIOS settings hda: DMA,hdb: DMA
      ide1:BM-DMA at 0xdc08-0xdc0f,BIOS settings hda: DMA,hdb: pio
hda: ST380011A,ATA Disk drive
hdb: Pioneer DVD-ROM ATAPI Model DVD-121 0104,ATAPI CD/DVD-ROM drive
blk: queue c03113a0, I/O limit 4095MB (mask 0xffffffff)
hdc: CD-RW CDR-6S48,ATAPI CD/DVD-ROM drive
ide0 at 0xec00-0xec07,0xe802 on irq 10
ide1 at 0xec00-0xec07,0xe802 on irq 10
hda: attached ide-disk driver.
(这里死机)

查明细(expert模式)时,有:
ide_scsi: CoD !=0 in idescsi_pc_intr
或:
The scsi wants to send us more data than expected

卸掉硬盘,问题依旧
安装提示符中输入:linux noscsi,问题依旧

以上,应该怎么解决呢?
页: [1]
查看完整版本: [求助]启动时死机怎么解决