QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 592|回复: 0

[求助]启动时死机怎么解决

[复制链接]
发表于 2004-9-2 00:08:16 | 显示全部楼层 |阅读模式
好几个版本的Linux加载内核时都会死机:
硬件:P4 2.8C、MSI i865PE、256MB DDR X2、FX 5700 Ultra、SB Live!5.1特惠版(这个没问题)、ST 80GB、光驱两个、无线网卡
系统:已安装WindowsXP Pro正常运行,但Linux不能安装

死机时屏幕像是这样:
……
ide: Assuming 33 Mhz system bus speed for PIO modesverride with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI:Enlabeling device 00:1f.1 (0005->0007)
PCI: Found IRQ 10 for device 00:1f.1
PCI: Shareing IRQ 10 with 00:1f.1
ICH5: chipest revision 2
ICH5: 100% mative mode on irq 10
      ide0:BM-DMA at 0xdc00-0xdc07,BIOS settings hda: DMA,hdb: DMA
      ide1:BM-DMA at 0xdc08-0xdc0f,BIOS settings hda: DMA,hdb: pio
hda: ST380011A,ATA Disk drive
hdb: Pioneer DVD-ROM ATAPI Model DVD-121 0104,ATAPI CD/DVD-ROM drive
blk: queue c03113a0, I/O limit 4095MB (mask 0xffffffff)
hdc: CD-RW CDR-6S48,ATAPI CD/DVD-ROM drive
ide0 at 0xec00-0xec07,0xe802 on irq 10
ide1 at 0xec00-0xec07,0xe802 on irq 10
hda: attached ide-disk driver.
(这里死机)

查明细(expert模式)时,有:
ide_scsi: CoD !=0 in idescsi_pc_intr
或:
The scsi wants to send us more data than expected

卸掉硬盘,问题依旧
安装提示符中输入:linux noscsi,问题依旧

以上,应该怎么解决呢?
您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-16 09:58 , Processed in 0.035829 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表