[xorg]启动时一个信息是否正常

sagaeon · 发表于 2005-6-3 13:43:05

(1280x1024,Generic Monitor) mode clock 108MHz exceeds DDC maximum 80MHz

xorg启动时的信息，不知道对我的显示器有没有损害。液晶1024x768。谢谢。

cnhnln · 发表于 2005-6-4 02:21:40

xorg.conf没写对？

sagaeon · 发表于 2005-6-4 21:46:50

X Window System Version 6.8.2 (Ubuntu 6.8.2-mea1 20050420170154 @tuxedo)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10 i686 [ELF]
Current Operating System: Linux sagaeon 2.6.12-rc5 #1 Sat May 28 12:11:57 GMT 2005 i686
Build Date: 20 April 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.12-rc5 (saga@sagaeon) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #1 Sat May 28 12:11:57 GMT 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun  4 21:46:42 2005
(==) Using config file: "/etc/X11/xorg.conf"
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
(1280x1024,Generic Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o":  No symbols found
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element /usr/lib/X11/fonts/Speedo, removing from list!

Section "Files"
# FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/share/fonts/"
EndSection

Section "Module"
# Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
# Load "xft"
# Load "xtt"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "i810"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 31-60
VertRefresh 56-75
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

没有关于1280x1024的选项啊？

妖狐藏马 · 发表于 2005-6-4 22:54:12

刷新率太高了吧

sagaeon · 发表于 2005-6-4 23:58:07

谢谢解答。现在设成

HorizSync 28-49
VertRefresh 43-72

还是有同样的警告信息。还有这个水平和竖直刷新怎么判断？在显示器上没看见说明。在XP下只见是1024x768@ 60hz。这个60又是指什么？

bigcat00 · 发表于 2005-6-5 01:03:30

HorizSync 31-60
VertRefresh 56-75

不高啊~~

cnhnln · 发表于 2005-6-5 01:57:04

在字符界面下运行
[code:1]xfree86 -configure[/code:1]
自动检测一下
然后看一下新生成的XF86Config-4（家目录下）的Device和Monitor字段是否正确认出了显卡和显示器，如果认出的话，就把相关内容复制到/etc/X11/XF86Config-4替代原有内容

dannycat · 发表于 2005-6-6 13:57:15

[quote:793b79cfdf="sagaeon"]

(1280x1024,Generic Monitor) mode clock 108MHz exceeds DDC maximum 80MHz

xorg启动时的信息，不知道对我的显示器有没有损害。液晶1024x768。谢谢。[/quote]像是 ddc 模块在探测你的显示器支持模式。不加载 ddc 试试看。

linky_fan · 发表于 2005-6-6 20:07:18

液晶和crt相比因为成像原理的不同,对刷新率的敏感程度也很不同, 显像管在60hz和80hz的情况下差别很大, 可是同样的测试在液晶上看出来就差不了多少.

xorg启动时的信息，不知道对我的显示器有没有损害。液晶1024x768。谢谢。

显不出来倒是有损害的, 显出来了不会有什么损坏的. :-)

		自动登录	找回密码
密码			注册

[xorg]启动时一个信息是否正常

Re: [xorg]启动时一个信息是否正常