|
|
发表于 2005-11-11 20:54:28
|
显示全部楼层
[code:1]
/*
Init for the Official LFS LiveCD
Written by Jeremy Huntwork, 2005-09-16
This code sets up a directory structure for the CD in the initramfs,
finds and mounts the LFS LiveCD, mounts the root file system via the
squashfs file, overlays it all with unionfs and finally passes
control over to sysvinit to finish the boot process.
*/
#include "init.h"
/* Devices to check for the LFS CD, could scan some stuff in /proc in a later version */
const char *devices[] =
{
"/dev/hda", "/dev/hdb", "/dev/hdc", "/dev/hdd", "/dev/hde", "/dev/hdf", "/dev/hdg", "/dev/hdh",
"/dev/sr0", "/dev/sr1", "/dev/sr2", "/dev/sr3", "/dev/sr4", "/dev/sr5", "/dev/sr6", "/dev/sr7",
NULL,
};
const char *lfscd;
int mountlfscd(void);
int main(int argc, char * argv[], char * envp[])
{
int i, fd, ffd;
struct loop_info loopinfo;
umask(0);
printf("Initramfs activated\n");
printf("Mounting tmpfs...\n");
i = mount("tmpfs", TMPFS, "tmpfs", 0, "size=90%"); /* Mount a tmpfs */
if (i<0) {
printf("Failed to mount tmpfs: %s\n", strerror(errno));
return (0);
}
mkdir(OVERLAY, 0755); /* Create a .overlay directory */
mkdir(DEV, 0755); /* Create a /dev directory */
mkdir(SHM, 0755); /* Create a /dev/shm directory */
mkdir(PROC, 0755); /* Create a /proc directory */
mkdir(TMP, 01777); /* Create a /tmp directory */
mkdir(CDROM_MOUNT, 0755); /* Create a .cdrom directory */
mkdir(SQFS, 0755); /* Create a .sqfs directory */
mkdir("/.tmpfs/.tmp",01777); /* Create a .tmp directory */
printf("Searching for the CD named %s...\n", VOLUME_ID);
for (i=0;i<MAX_RETRIES;i++)
{
if (mountlfscd())
break;
/* Failed to find any device with an LFS LiveCD */
printf("I couldn't find an LFS LiveCD in any drive!!\n");
printf("I'm going to wait 10 seconds and try again (Try %d/%d)\n", i, MAX_RETRIES);
sleep(10);
}
if (i>=MAX_RETRIES)
{
printf("I couldn't find an LFS LiveCD in any drive after %d retries!\n", MAX_RETRIES);
reboot(RB_POWER_OFF);
return(0);
}
/* If we're here, we have the LiveCD mounted and verifieid */
/* Now, attempt to attach the squashfs root file to /dev/loop0 */
printf("Setting up the loopback device...\n");
ffd = open(SQFS_FILE, O_RDONLY);
if (ffd<0) {
printf("Failed to open the squashfs file: %s\n", strerror(errno));
return(0);
}
fd = open(LOOP, O_RDONLY);
if (fd<0) {
printf("Failed to open the loop device: %s\n", strerror(errno));
return(0);
}
memset(&loopinfo, 0, sizeof(loopinfo));
snprintf(loopinfo.lo_name, LO_NAME_SIZE, "%s", SQFS_FILE);
loopinfo.lo_offset = 0;
loopinfo.lo_encrypt_key_size = 0;
loopinfo.lo_encrypt_type = LO_CRYPT_NONE;
if(ioctl(fd, LOOP_SET_FD, ffd) < 0) {
printf("Failed to set up device: %s\n", strerror(errno));
return(0);
}
close(ffd);
if(ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
printf("Failed to set up device: %s\n", strerror(errno));
(void) ioctl(fd, LOOP_CLR_FD, 0);
close(fd);
return(0);
}
close(fd);
/* Mount the squashfs root file system */
printf("Mounting squashfs file...\n");
i = mount(LOOP, SQFS, "squashfs", MS_RDONLY, NULL);
if (i<0) {
printf("Failed to mount squashfs: %s\n", strerror(errno));
return(0);
}
/* Activate unionfs */
printf("Mounting unionfs...\n");
i = mount("unionfs", "/.union", "unionfs", 0, "dirs=/.tmpfs/.overlay=rw:/.tmpfs/.cdrom=ro:/.tmpfs/.sqfs=ro");
if (i<0) {
printf("Failed to mount unionfs: %s\n", strerror(errno));
return(0);
}
/* Move the tmpfs to /dev/shm in the unionfs */
mount(TMPFS, "/.union/dev/shm", NULL, MS_MOVE, NULL);
/* Create a symlink for the CD drive to /dev/lfs-cd */
symlink(lfscd, "/.union/dev/lfs-cd");
mount("/.union/dev/shm/.tmp", "/.union/tmp", NULL, MS_BIND, NULL);
/* Chroot into the unionfs */
chdir("/.union");
mount(".", "/", NULL, MS_MOVE, NULL);
if ( chroot(".") || chdir("/") )
return(0);
/* We're done! Pass control to sysvinit. */
printf("Starting init...\n");
i = execve("/sbin/init", argv, envp);
if (i<0)
printf("Failed to start init: %s :(\n", strerror(errno));
return(0);
}
/* This will look for and mount the LFS LiveCD, if found/mounted it'll return 1, otherwise 0 */
int mountlfscd(void)
{
struct iso_primary_descriptor pd;
int i;
for(i=0;devices[i]!=NULL;i++)
{
int fd, status;
const char *curdevice = devices[i];
char buf[ISO_BLOCK_SIZE];
/* Try to open CD drive to see if we can use it */
fd = open(curdevice, O_RDONLY | O_NONBLOCK);
if (fd<0)
{
/*
We'll get here if we can't open the device
(No such device, No such file or directory, etc, etc)
printf("%s: open failed: %s\n", curdevice, strerror(errno)); */
continue; /* On to the next device!! */
}
/* Try to see what the status of the CD drive is */
status = ioctl(fd, CDROM_DRIVE_STATUS, 0);
if (status<0)
{
/* We'll probably get here if we open a hard disk.
No need to always print out this error. */
/* printf("%s: ioctl failed: %s\n", curdevice, strerror(errno)); */
close(fd);
continue; /* On to the next device!! */
}
if (status != CDS_DISC_OK)
{
/* We'll probably get here if there's no CD in the drive */
printf("%s: Drive not ready\n", curdevice);
close(fd);
continue; /* On to the next device!! */
}
/* If we're here, the cd drive seems to have a disc in it, and is okay!
Now we'll try to match the Volume ID */
lseek(fd, ISO_PD_BLOCK*ISO_BLOCK_SIZE, SEEK_SET);
/* Read the ISO Block info and fill a struct with it */
read(fd, buf, ISO_BLOCK_SIZE);
memcpy( &pd, buf, sizeof(pd) );
printf("%s: Volume ID is %s\n", curdevice, pd.volume_id);
/* close(fd); */
/* Compare the string in pd.volume_id with the VOLUME_ID
generated by the livecd Makefiles */
i = strncmp(VOLUME_ID, pd.volume_id, strlen(VOLUME_ID));
if (i!=0) {
printf("This is not the correct CD. Moving on...\n");
close(fd);
continue;
}
/* Try to mount the cd drive*/
status = mount(curdevice, CDROM_MOUNT, CDROM_FSTYPE, MS_RDONLY, NULL);
if (status<0)
{
printf("%s: mount failed: %s\n", curdevice, strerror(errno));
close(fd);
continue; /* On to the next device!! */
}
/* If we're here, we definitely have the LiveCD mounted at the mount point :) */
memset(buf, 0, 32); /* Clear buffer so we don't have to check read's status */
read(fd, buf, 10);
close(fd);
/* YAY! we have the LFS LiveCD mounted :) */
printf("%s: LFS LiveCD Verified\n", curdevice);
lfscd = curdevice;
return(1);
}
/* Nuts, can't find an LFS LiveCD anywhere */
return(0);
}
[/code:1]
上面就是initramfs_data_cpio.gz解包后的init的源代码, 应该加上一个挂载/成tmpfs的会可以的, 研究中............... |
|
IP卡
狗仔卡
发表于 2005-11-9 11:06:41
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡