|
|
我原来用的是网通的ADSL，最近换成了铁通的ADSL。
但是铁通的linux拨号不成功，即使用ADSL猫自带的拨号也不可以。但是Windows就正常拨号。
猫换过试过，网线换过。
系统是suse linux 10.0
[quote]
Buttons: --dsl
##Y2support-/tmp/siga/siga.txt:
<pre>
1. Hardware
-------------------------------------------------------------------------------
1.1 procinfo - /usr/bin/procinfo
Linux 2.6.13-15-default (geeko@buildhost) (gcc 4.0.2 20050901) #1 1CPU [linux.]
Memory: Total Used Free Shared Buffers
Mem: 515772 497696 18076 0 43152
Swap: 530136 65224 464912
Bootup: Wed Jul 12 09:19:19 2006 Load average: 0.51 0.36 0.32 1/144 24119
user : 1:52:55.79 15.9% page in : 1046321 disk 1: 24400r 78782w
nice : 0:00:43.06 0.1% page out: 1535998 disk 2: 22535r 61791w
system: 0:12:09.61 1.7% page act: 7774275
IOwait: 0:03:17.35 0.5% page dea: 152356
hw irq: 0:00:47.57 0.1% page flt: 37996940
sw irq: 0:00:07.40 0.0% swap in : 6705
idle : 9:41:53.59 81.7% swap out: 19400
uptime: 11:51:54.73 context : 25528989
irq 0: 10677931 timer irq 8: 2 rtc
irq 1: 7468 i8042 irq 9: 0 acpi
irq 2: 0 cascade [4] irq 10: 262747 uhci_hcd:usb3, VIA82
irq 3: 4 irq 11: 1814622 uhci_hcd:usb1
irq 4: 4 irq 12: 2 ehci_hcd:usb4
irq 5: 0 uhci_hcd:usb2 irq 14: 103187 ide0
irq 6: 5 irq 15: 84331 ide1
irq 7: 3 parport0 [3]
-------------------------------------------------------------------------------
1.2 cmdline - /proc/cmdline
root=/dev/md0 selinux=0 resume=/dev/hda2 splash=silent
-------------------------------------------------------------------------------
1.3 lsPCI - /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)
lspci - /sbin/lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: d9d00000-ddcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at dffe0000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e000
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at e400
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at e800
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 10
Interrupt: pin D routed to IRQ 12
Region 0: Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at fc00
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Avance Logic Inc.: Unknown device 4740
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at da000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at dfef0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
-------------------------------------------------------------------------------
lspci - /sbin/lspci -n
00:00.0 Class 0600: 1106:3189
00:01.0 Class 0604: 1106:b168
00:0a.0 Class 0200: 10ec:8139 (rev 10)
00:10.0 Class 0c03: 1106:3038 (rev 80)
00:10.1 Class 0c03: 1106:3038 (rev 80)
00:10.2 Class 0c03: 1106:3038 (rev 80)
00:10.3 Class 0c03: 1106:3104 (rev 82)
00:11.0 Class 0601: 1106:3177
00:11.1 Class 0101: 1106:0571 (rev 06)
00:11.5 Class 0401: 1106:3059 (rev 50)
01:00.0 Class 0300: 10de:002d (rev 15)
-------------------------------------------------------------------------------
1.4 boot.msg - /var/log/boot.msg
Inspecting /boot/System.map-2.6.13-15-default
Loaded 24236 symbols from /boot/System.map-2.6.13-15-default.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
<4> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>On node 0 totalpages: 131056
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 126960 pages, LIFO batch:31
<7> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 AMI ) @ 0x000fa950
<7>ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
<7>ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
<7>ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
<7>ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<4>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/md0 selinux=0 resume=/dev/hda2 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 1470.269 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 513616k/524224k available (2028k kernel code, 9936k reserved, 700k data, 204k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 2943.66 BogoMIPS (lpj=5887333)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
<4>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<7>CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>mtrr: v2.0 (20020519)
<4>CPU: AMD Athlon(tm) XP 1900+ stepping 00
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1667k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 1c20)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb41, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to [email protected] cc [email protected])
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: dde00000-dfefffff
<6> PREFETCH window: d9d00000-ddcfffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<4>audit(312768025.064:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<4>PNP: PS/2 controller doesn't have AUX irq; using default 0xc
<6>PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 112
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 32768 bind 3276
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>PCI0 USB1 USB2 USB3 EHCI UAR1 AC9 MC9 ILAN SLPB
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 0000:00:11.1
<4> ACPI-0212: *** Warning: Device is not power manageable
<4> ACPI-0402: *** Warning: Unable to derive IRQ for device 0000:00:11.1
<4>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
<6>PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: ST340016A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
<6>hda: cache flushes not supported
<6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
<7>Probing IDE interface ide1...
<4>hdd: ST320410A, ATA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdd: max request size: 128KiB
<6>hdd: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33)
<6>hdd: cache flushes not supported
<6> hdd: hdd1 hdd2 < hdd5 hdd6 >
<6>ACPI: CPU0 (power states: C1[C1])
<6>ACPI: Processor [CPU1] (supports 16 throttling states)
<6>md: raid0 personality registered as nr 2
<4>Attempting manual resume
<3>swsusp: Suspend partition has wrong signature?
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: considering hdd6 ...
<6>md: adding hdd6 ...
<4>md: hdd5 has different UUID to hdd6
<6>md: adding hda6 ...
<4>md: hda5 has different UUID to hdd6
<6>md: created md1
<6>md: bind<hda6>
<6>md: bind<hdd6>
<6>md: running: <hdd6><hda6>
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md1 stopped.
<6>md: unbind<hdd6>
<6>md: export_rdev(hdd6)
<6>md: unbind<hda6>
<6>md: export_rdev(hda6)
<6>md: considering hdd5 ...
<6>md: adding hdd5 ...
<6>md: adding hda5 ...
<6>md: created md0
<6>md: bind<hda5>
<6>md: bind<hdd5>
<6>md: running: <hdd5><hda5>
<4>md0: setting max_sectors to 64, segment boundary to 16383
<4>raid0: looking at hdd5
<4>raid0: comparing hdd5(10490304) with hdd5(10490304)
<4>raid0: END
<4>raid0: ==> UNIQUE
<4>raid0: 1 zones
<4>raid0: looking at hda5
<4>raid0: comparing hda5(10490304) with hdd5(10490304)
<4>raid0: EQUAL
<4>raid0: FINAL 1 zones
<4>raid0: done.
<4>raid0 : md_size is 20980608 blocks.
<4>raid0 : conf->hash_spacing is 20980608 blocks.
<4>raid0 : nb_zone is 1.
<4>raid0 : Allocating 4 bytes for hash.
<6>md: ... autorun DONE.
<5>ReiserFS: md0: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md0: using ordered data mode
<5>ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md0: checking transaction log (md0)
<5>ReiserFS: md0: Using r5 hash to sort names
<7>spurious 8259A interrupt: IRQ7.
<6>md: md1 stopped.
<6>md: bind<hdd6>
<6>md: bind<hda6>
<6>md: raid1 personality registered as nr 3
<6>raid1: raid set md1 active with 2 out of 2 mirrors
<6>md: Autodetecting RAID arrays.
<3>md: could not bd_claim hdd6.
<3>md: could not bd_claim hda6.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
<5>ReiserFS: md1: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md1: using ordered data mode
<5>ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md1: checking transaction log (md1)
<5>ReiserFS: md1: Using r5 hash to sort names
<5>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda3: using ordered data mode
<5>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda3: checking transaction log (hda3)
<5>ReiserFS: hda3: Using r5 hash to sort names
<6>NTFS driver 2.1.23 [Flags: R/W MODULE].
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Nov 30 08:00:30 1979
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneMounting shared memory FS on /dev/shmdone
Initializing Multiple Devices...
mdadm: /dev/md1 has been started with 2 drives.
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
/dev/hda1 has gone 39991 days without being checked, check forced.
^A/dev/hda1: |==== | 7.8% ^B^A/dev/hda1: |========= / 15.6% ^B^A/dev/hda1: |================= - 31.1% ^B^A/dev/hda1: |====================== \ 38.9% ^B^A/dev/hda1: |========================== | 46.7% ^B^A/dev/hda1: |============================== / 54.4% ^B^A/dev/hda1: |=================================== - 62.2% ^B^A/dev/hda1: |===================================================== \ 95.0% ^B^A/dev/hda1: |========================================================| 100.0% ^B^A ^B/dev/hda1: 40/131616 files (0.0% non-contiguous), 5726/263056 blocks
Reiserfs super block in block 16 on 0x901 of format 3.6 with standard journal
Blocks (total/free): 2002064/1580530 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext2 (rw,acl,user_xattr)
/dev/md1 on /mnt/md1 type reiserfs (rw,acl,user_xattr)
mount: you didn't specify a filesystem type for /dev/hda3
I will try type reiserfs
/dev/hda3 on /source type reiserfs (rw,acl)
mount: special device /dev/hdb1 does not exist
failedSetting up the CMOS clockdone
<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=773 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/sbin/udevd ]
Starting udevd done
Loading required kernel modules
doneSetting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
done
<notice>killproc: kill(1988,29)
Creating /var/log/boot.msg
doneColdplug
Coldplug: cleaning /events hwup: Loading module 'lp' for device 'printer'
processing eventsdone
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Restore device permissionsdone
Disk /dev/md0 doesn't contain a valid partition table
Disk /dev/md1 doesn't contain a valid partition table
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1988,3)
INIT: Entering runlevel: 3
Boot logging started on /dev/tty1(/dev/console) at Fri Nov 30 08:00:19 1979
Master Resource Control: previous runlevel: N, switching to runlevel: 3
<notice>checkproc: /sbin/udevd 3780<notice>checkproc: /sbin/udevd 3763<notice>checkproc: /sbin/udevd 3577<notice>checkproc: /sbin/udevd 3556<notice>checkproc: /sbin/udevd 3555<notice>checkproc: /sbin/udevd 3508<notice>checkproc: /sbin/udevd 3499<notice>checkproc: /sbin/udevd 2209
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
Starting D-BUS daemondone
Setting up network interfaces:
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
lo
lo IP address: 127.0.0.1/8
done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
eth0 configuration: eth-id-10:e0:8c:5f:da:1e
eth0 IP address: 192.168.1.253/24
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
mDNSResponder (Engineering Build) (Sep 9 2005 15:59:0 [4275]: starting
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting mdnsddone
Starting syslog services<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting cupsddone
Starting HAL daemondone
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Checking/updating CPU microcodedone
Loading keymap qwerty/us.map.gz
done<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
Starting powersaved (accessing ACPI events over acpid) done
Loading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat1-16.psfu -m none G0:iso8859-1
doneMount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Try to get initial date and time via NTP from ntp.cuhk.edu.hkError : Temporary failure in name resolution
failed
Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/md0 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: nfs smbfs splash
<notice>killproc: kill(3687,3)
dmesg - /bin/dmesg
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa950
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: local apic disabled
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/md0 selinux=0 resume=/dev/hda2 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1470.269 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513616k/524224k available (2028k kernel code, 9936k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2943.66 BogoMIPS (lpj=5887333)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 1900+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1667k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 1c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb41, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to [email protected] cc [email protected])
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dde00000-dfefffff
PREFETCH window: d9d00000-ddcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(312768025.064:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 3276
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 USB1 USB2 USB3 EHCI UAR1 AC9 MC9 ILAN SLPB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI-0212: *** Warning: Device is not power manageable
ACPI-0402: *** Warning: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
Probing IDE interface ide1...
hdd: ST320410A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: max request size: 128KiB
hdd: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33)
hdd: cache flushes not supported
hdd: hdd1 hdd2 < hdd5 hdd6 >
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU1] (supports 16 throttling states)
md: raid0 personality registered as nr 2
Attempting manual resume
swsusp: Suspend partition has wrong signature?
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdd6 ...
md: adding hdd6 ...
md: hdd5 has different UUID to hdd6
md: adding hda6 ...
md: hda5 has different UUID to hdd6
md: created md1
md: bind<hda6>
md: bind<hdd6>
md: running: <hdd6><hda6>
md: personality 3 is not loaded!
md: do_md_run() returned -22
md: md1 stopped.
md: unbind<hdd6>
md: export_rdev(hdd6)
md: unbind<hda6>
md: export_rdev(hda6)
md: considering hdd5 ...
md: adding hdd5 ...
md: adding hda5 ...
md: created md0
md: bind<hda5>
md: bind<hdd5>
md: running: <hdd5><hda5>
md0: setting max_sectors to 64, segment boundary to 16383
raid0: looking at hdd5
raid0: comparing hdd5(10490304) with hdd5(10490304)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hda5
raid0: comparing hda5(10490304) with hdd5(10490304)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 20980608 blocks.
raid0 : conf->hash_spacing is 20980608 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: ... autorun DONE.
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
spurious 8259A interrupt: IRQ7.
md: md1 stopped.
md: bind<hdd6>
md: bind<hda6>
md: raid1 personality registered as nr 3
raid1: raid set md1 active with 2 out of 2 mirrors
md: Autodetecting RAID arrays.
md: could not bd_claim hdd6.
md: could not bd_claim hda6.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
ReiserFS: md1: found reiserfs format "3.6" with standard journal
ReiserFS: md1: using ordered data mode
ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md1: checking transaction log (md1)
ReiserFS: md1: Using r5 hash to sort names
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
NTFS driver 2.1.23 [Flags: R/W MODULE].
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x77, irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 248 bytes per conntrack
Adding 530136k swap on /dev/hda2. Priority:-1 extents:1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xe0b48f00, 10:e0:8c:5f:da:1e, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
USB Universal Host Controller Interface driver v2.3
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 5, io base 0x0000e400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 10, io base 0x0000e800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 12, io mem 0xdffffe00
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=5 option
and report if it works on your machine.
For more details, read ALSA-Configuration.txt.
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
NET: Registered protocol family 23
via_ircc: module not supported by Novell, setting U taint flag.
ACPI-0212: *** Warning: Device is not power manageable
usb 1-2: USB disconnect, address 2
usb 1-2: new low speed USB device using uhci_hcd and address 3
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:10.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
IA-32 Microcode Update Driver: v1.14 <[email protected]>
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
powernow-k8: Processor cpuid 6a0 not supported
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=221.231.130.221 DST=192.168.1.253 LEN=576 TOS=0x00 PREC=0x00 TTL=113 ID=34268 PROTO=TCP SPT=80 DPT=25574 WINDOW=17280 RES=0x00 ACK URGP=0 OPT (0101080A0068006600333A83)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=221.231.130.221 DST=192.168.1.253 LEN=576 TOS=0x00 PREC=0x00 TTL=113 ID=34284 PROTO=TCP SPT=80 DPT=25574 WINDOW=17280 RES=0x00 ACK URGP=0 OPT (0101080A0068006700333A86)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=221.231.130.221 DST=192.168.1.253 LEN=576 TOS=0x00 PREC=0x00 TTL=113 ID=34332 PROTO=TCP SPT=80 DPT=25574 WINDOW=17280 RES=0x00 ACK URGP=0 OPT (0101080A0068006700333A87)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=221.231.130.221 DST=192.168.1.253 LEN=576 TOS=0x00 PREC=0x00 TTL=113 ID=34377 PROTO=TCP SPT=80 DPT=25574 WINDOW=17280 RES=0x00 ACK URGP=0 OPT (0101080A0068006700333A89)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=221.231.130.202 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=113 ID=34132 PROTO=TCP SPT=80 DPT=15197 WINDOW=17280 RES=0x00 ACK URGP=0 OPT (0101080A00C4F960004853F5)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.253 DST=61.157.205.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16052 DF PROTO=TCP SPT=3661 DPT=80 WINDOW=7966 RES=0x00 ACK FIN URGP=0 OPT (0101080A006C1FE61DCD875F)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.253 DST=61.157.205.104 LEN=550 TOS=0x00 PREC=0x00 TTL=64 ID=54241 DF PROTO=TCP SPT=3660 DPT=80 WINDOW=7252 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A006C57D61DCD6FDF)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.253 DST=61.157.205.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16054 DF PROTO=TCP SPT=3661 DPT=80 WINDOW=7966 RES=0x00 ACK FIN URGP=0 OPT (0101080A006C64E61DCD875F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=519 TOS=0x00 PREC=0x00 TTL=47 ID=904 DF PROTO=TCP SPT=80 DPT=23226 WINDOW=1876 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A1E85D1650098AEC
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=62799 DF PROTO=TCP SPT=80 DPT=23234 WINDOW=1876 RES=0x00 ACK FIN URGP=0 OPT (0101080A1E87D5A300991D73)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=62807 DF PROTO=TCP SPT=80 DPT=23234 WINDOW=1876 RES=0x00 ACK FIN URGP=0 OPT (0101080A1E87F7BD00991D73)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=62811 DF PROTO=TCP SPT=80 DPT=23234 WINDOW=1876 RES=0x00 ACK FIN URGP=0 OPT (0101080A1E8864DD00991D73)
NET: Registered protocol family 17
eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 24
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.253 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=48988 DF PROTO=TCP SPT=80 DPT=16234 WINDOW=1765 RES=0x00 ACK FIN URGP=0 OPT (0101080A1EA019C1009F7707)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=48990 DF PROTO=TCP SPT=80 DPT=16234 WINDOW=1765 RES=0x00 ACK FIN URGP=0 OPT (0101080A1EA01C07009F7707)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=48992 DF PROTO=TCP SPT=80 DPT=16234 WINDOW=1765 RES=0x00 ACK FIN URGP=0 OPT (0101080A1EA02093009F7707)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=48994 DF PROTO=TCP SPT=80 DPT=16234 WINDOW=1765 RES=0x00 ACK FIN URGP=0 OPT (0101080A1EA029AB009F7707)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=10:e0:8c:5f:da:1e:00:e0:4c:6b:af:a2:08:00 SRC=61.157.205.104 DST=192.168.1.253 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=48998 DF PROTO=TCP SPT=80 DPT=16234 WINDOW=1765 RES=0x00 ACK FIN URGP=0 OPT (0101080A1EA0603C009F7707)
-------------------------------------------------------------------------------
1.5 ISA-PNP - /usr/sbin/hwinfo --isapnp
10: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.147]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
Unique ID: z9pp.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:00
SysFS BusID: 00:00
Hardware Class: unknown
Model: "PnP Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=new, avail=yes, need=no, active=unknown
11: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.147]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
Unique ID: QL3u.ld94kxNGZf5
SysFS ID: /devices/pnp0/00:01
SysFS BusID: 00:01
Hardware Class: unknown
Model: "PnP Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0200
Config Status: cfg=new, avail=yes, need=no, active=unknown
12: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.147]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
Unique ID: tWJy.WYwRElrJa93
SysFS ID: /devices/pnp0/00:02
SysFS BusID: 00:02
Hardware Class: unknown
Model: "PnP Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0b00
Config Status: cfg=new, avail=yes, need=no, active=unknown
13: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.147]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
Unique ID: KiZ0.bvKf3UMzZfE
SysFS ID: /devices/pnp0/00:03
SysFS BusID: 00:03
Hardware Class: unknown
Model: "PnP Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0800
Config Status: cfg=new, avail=yes, need=no, active=unknown
14: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.147]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
Unique ID: ntp4.DE8RM9cWQQ8
SysFS ID: /devices/pnp0/00:04
SysFS BusID: 00:04
Hardware Class: unknown
Model: "PnP Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0 |
|
IP卡
狗仔卡
发表于 2006-7-12 21:32:28
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡