redhat9+摄像头?如何实现？

wind1128

我的是redhat9，最近得到一个philips摄像头型号为pcvc720k,想让它工作与redhat9 下不能否实现?能的话情告知方法

sjinny

好像有个工具的。

Dragonfly

install a gnomemeeting.
enable usb support in u kernel.

jackzheng2002

ok？

Dragonfly

yes, then my gnome show my cool pic.  
in kernel usb, i choose usb support, uhci support. usb mass storage for my udisk, and ibm (xirlink) support for my camera. u can check ttp://www.linux-usb.org.
u pcvc720k should use ov511 i think.

Dragonfly

http://www.qbik.ch/usb/devices/index.php is also a good place.

wind1128

let me try...thanks~

wind1128

OV511+ is not for linux driver?

Dragonfly

i can find ov511 in 2.4.20 kernel.

breezesun

creative pccam 300
应该用什么驱动？
在rh8用spca50x的驱动是可以的
但是在rh9下不行
改了源码编译出模块，插入后，打开gnomemeeting就死机。

breezesun

[quote:ca37fe5871="cheungming"]yes, then my gnome show my cool pic.  
in kernel usb, i choose usb support, uhci support. usb mass storage for my udisk, and ibm (xirlink) support for my camera. u can check ttp://www.linux-usb.org.
u pcvc720k should use ov511 i think.[/quote]

http://www.linux-usb.org连不上

Dragonfly

u pc cam 300 should use spca50x.
can u download the one from http://sourceforge.net/projects/spca50x/ and try again?

breezesun

[quote:73dafe2420="cheungming"]u pc cam 300 should use spca50x.
can u download the one from http://sourceforge.net/projects/spca50x/ and try again?[/quote]

没有别的驱动了吗？
我在rh8上就用的这个
rh9上在mmap的一些地方有了改动了
是装不上了。
后来我读了mailing list，有人做了改动，可以编译通过
但是只是支持 intel cs110, intel cs430一开始也不支持
现在是否支持我没注意看

modprobe是可以的，但是bu不能用

难道要换一个应用？  给推荐一个应用吧。比如gpcam什么的

Dragonfly

yes, gpcam is the suggested application. i use gnomemeeting personally.
rh9 seems to bring so many troubles.

breezesun

[quote:822ac2ab20="cheungming"]yes, gpcam is the suggested application. i use gnomemeeting personally.
rh9 seems to bring so many troubles.[/quote]

上传一个吧，sourceforge下不来。：（