为什么我的mplayer会这样？帮帮小弟吧！

icepoint

我按照公社的mplayer安装手册安装了Mplayer 0.90 rc5(特别版)发现不能正常使用：
在控制台中启动后提示如下：
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale


MPlayer 0.90rc5-3.2.2 (C) 2000-2003 Arpad Gereoffy (看DOCS!)

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 1)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: 50 audio & 136 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Failed to open /dev/rtc: 设备或资源忙 (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Can't open input config file /root/.mplayer/input.conf : 没有那个文件或目录
Can't open input config file /usr/local/etc/mplayer/input.conf : 没有那个文件或目录
Falling back on default (hardcoded) input config

播放 /mnt/win_e/Recreation/mtv/全知贤热舞.mpg
检测到MPEG-PS文件格式。
VIDEO:  MPEG1  320x240  (aspect 1)  30.00 fps  990.4 kbps (123.8 kbyte/s)
==========================================================================
打开音频解码器: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8000->176400 (64.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
fbdev: Can't open /dev/fb0: 没有那个设备
==========================================================================
打开视频解码器: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo配置要求 - 320 x 240 (选择 csp: Mpeg PES)
VDec: using Mpeg PES as output csp (no 0)
电影宽高比未定义 - 无法使用预放大.
VO: [null] 320x240 => 320x240 Mpeg PES
Selected video codec: [mpegpes] vfm:mpegpes (Mpeg PES output (.mpg or Dxr3/DVB card))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
audio_setup: Can't open audio device /dev/dsp: 资源暂时不可用
AO: [null] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
开始播放.（紧跟一些跳动的数字……）


以下是我configure时的信息：
[root@icepoint-m MPlayer-0.90rc5]# ./configure
Detected operating system: Linux
Detected host architecture: i386
Checking for gcc version ... 3.2.2, ok
Checking for CPU vendor ... GenuineIntel (6:8:1)
Checking for CPU type ...  Pentium III (Coppermine)
Checking for GCC & CPU optimization abilities ... pentium3
Checking for kernel support of mmx ... yes
Checking for kernel support of mmx2 ... yes
Checking for kernel support of sse ... yes
Checking for mtrr support ... yes
Checking for assembler (as 2.13.90.0.1 ... ok
Checking for Linux kernel version ... 2.4.20-8, ok
Checking for awk ... gawk
Checking for extra headers ... none
Checking for extra libs ... none
Checking for i18n ... yes
Checking for setlocale() ... yes
Checking for language ... using zh
Checking for enable sighandler ... yes
Checking for runtime cpudetection ... no
Checking for restrict keyword ... __restrict
Checking for kstat ... no
Checking for posix4 ... no
Checking for lrintf ... yes
Checking for nanosleep ... yes
Checking for socklib ... yes (using -lnsl)
Checking for inet_pton() ... yes (using -lnsl)
Checking for inttypes.h (required) ... yes
Checking for word size ... 32
Checking for stddef.h ... yes
Checking for malloc.h ... yes
Checking for memalign() ... yes
Checking for alloca.h ... yes
Checking for mman.h ... yes
Checking for dynamic loader ... yes
Checking for dynamic a/v plugins support ... no
Checking for pthread ... yes (using -lpthread)
Checking for sys/soundcard.h ... yes
Checking for sys/dvdio.h ... no
Checking for sys/cdio.h ... no
Checking for linux/cdrom.h ... yes
Checking for dvd.h ... no
Checking for BSDI dvd.h ... no
Checking for HPUX SCSI header ... no
Checking for userspace SCSI headers (Solaris) ... no
Checking for termcap ... yes
Checking for termios ... yes (using sys/termios.h)
Checking for shm ... yes
Checking for linux devfs ... no
Checking for scandir() ... yes
Checking for strsep() ... yes
Checking for vsscanf() ... yes
Checking for sys/sysinfo.h ... yes
Checking for Mac OS X APIs ... no
Checking for 3dfx ... no
Checking for tdfxfb ... no
Checking for DirectFB headers presence ... not found
Checking for DirectFB ... no
Checking for X11 headers presence ... not found (check if the dev(el) packages are installed)
Checking for X11 libs presence ... not found (check if the dev(el) packages are installed)
Checking for X11 ... no
Checking for DPMS ... no
Checking for Xv ... no
Checking for Xinerama ... no
Checking for Xxf86vm ... no
Checking for DGA ... no
Checking for OpenGL ... no
Checking for /dev/mga_vid ... no
Checking for xmga ... no
Checking for GGI ... no
Checking for AA ... no
Checking for SVGAlib ... no
Checking for FBDev ... yes
Checking for DVB ... no (specify path to DVB/ost/include with --with-extraincdir=DIR)
Checking for DVB HEAD ... no (specify path to DVB/include (HEAD Version) with --with-extraincdir=DIR)
Checking for PNG support ... no
Checking for JPEG support ... no
Checking for GIF support ... no
Checking for VESA support ... yes
Checking for SDL ... no
Checking for Windows waveout ... no
Checking for Directx ... no
Checking for NAS ... no
Checking for DXR2 ... no
Checking for DXR3/H+ ... no
Checking for libmp1e ... no
Checking for libfame ... no
Checking for OSS Audio ... yes
Checking for aRts ... no
Checking for EsounD ... no
Checking for ALSA audio ... no
Checking for Sun audio ... no
Checking for Sun mediaLib ... no
Checking for SGI audio ... no
Checking for VCD support ... ok
Checking for DVD support (libmpdvdkit) ... yes
Checking for DVD support (libcss - old style) ... no
Checking for DVD support (libdvdread - new style) ... disabled by libmpdvdkit2
Checking for DVD support (libdvdnav) ... no
Checking for cdparanoia ... no
Checking for freetype >= 2.0.9 ... yes
Checking for zlib ... yes
Checking for RTC ... yes
Checking for external liblzo support ... no
Checking for mad support ... no
Checking for OggVorbis support ... yes
Checking for faad2 (AAC) support ... no
Checking for Win32 codec DLL files path ... /usr/lib/win32
Checking for Win32 codec DLL support ... yes
Checking for Win32 loader support ... yes
Checking for DirectShow ... yes
Checking for XAnim DLL ... no (no suitable directory found - see DOCS/codecs.html)
Checking for RealPlayer DLL ... no (no suitable directory found - see DOCS/codecs.html)
Checking for LIVE.COM Streaming Media libraries ... no
Checking for iconv ... yes
Checking for FFmpeg libavcodec (static) ... yes
Checking for libdv-0.9.5+ ... no
Checking for zr ... no
Checking for bl ... no
Checking for XviD ... no
Checking for DivX4linux/DivX5linux/OpenDivX decore ... no
Checking for libmp3lame (for mencoder) ... no
Checking for DivX4linux encore (for mencoder) ... no
Checking for mencoder ... yes
Checking for fastmemcpy ... yes
Checking for UniquE RAR File Library ... yes
Checking for TV interface ... yes
Checking for EDL support ... yes
Checking for *BSD BrookTree 848 TV interface ... no
Checking for Video 4 Linux TV interface ... yes
Checking for audio select() ... yes
Checking for streaming ... yes
Checking for byte order ... Little Endian
Checking for shared postprocess lib ... no
Checking for New config ... yes
Checking for OSD menu ... no
Checking for QTX codecs ... yes
Checking for Subtitles sorting ... yes
Checking for XMMS inputplugin support ... no
Checking for GUI ... no
Checking for ftello() ... yes
Checking for vidix ... yes
Checking for joystick ... no
Checking for lirc ... no
Creating config.mak
Creating config.h
Creating libvo/config.mak
Creating libao2/config.mak
Creating help_mp.h
Adding untranslated messages to help_mp.h

Config files successfully generated by ./configure !

  Install prefix: /usr/local
  Data directory: /usr/local/share/mplayer
  Config direct.: /usr/local/etc/mplayer

  Byte order: Little Endian
  Optimizing for: pentium3 mmx mmx2 sse mtrr

  Enabled optional drivers:
    Input: streaming tv-v4l edl tv mpdvdkit2 vcd
    Codecs: qtx libavcodec dshow/dmo win32 libvorbis
    Audio output: oss mpegpes(file)
    Video output: vesa mpegpes(file) fbdev
  Disabled optional drivers:
    Input: tv-bsdbt848 cdda dvdnav dvdread dvdcss
    Codecs: opendivx xvid libdv real xanim libmad liblzo gif
    Audio output: sgi sun alsa esd arts dxr2 nas win32 sdl
    Video output: xvidix bl zr dxr3 dxr2 directx sdl gif89a jpeg png svga aa ggi xmga mga opengl dga xv x11 directfb tdfxfb 3dfx

'config.h' and 'config.mak' contain your configuration options.
Note: If you alter theses files (for instance CFLAGS) MPlayer may no longer
      compile *** DO NOT REPORT BUGS if you tweak these files ***

'make' will now compile MPlayer and 'make install' will install it.
Note: On non-Linux systems you might need to use 'gmake' instead of 'make'.

Please check mtrr settings at /proc/mtrr (see DOCS/video.html#mtrr)


Check configure.log if you wonder why an autodetection failed (check whether
the development headers/packages are installed).

If you suspect a bug, please read DOCS/bugreports.html.