我想问一下，哪位用过k3b?

root@fred

我用他刻录镜像出错，找不到cdrdao, 让我在设备设置中自己选一个，通常是“generic-mmc”，我不知道怎么设置？配置栏里好象没有这一项吗？btw,我的combo是三星的，k3b虽然能认出来“sumsung-cdrw/dvd sm352b"，却好象不能加载他的驱动，不知如何解决啊？以下是完整的debug output

System
-----------------------
K3b Version: 0.11.9
KDE Version: 3.2.2
QT Version:  3.3.1

cdrdao
-----------------------
Cdrdao version 1.1.8 - (C) Andreas Mueller <[email protected]>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.7'
/dev/hdc: SAMSUNG CDRW/DVD SM-352B Rev: T801
WARNING: Cannot read driver table from file "/usr/share/cdrdao/drivers" - using built-in table.
ERROR: No driver found for 'SAMSUNG CDRW/DVD SM-352B', available drivers:
cdd2600
generic-mmc
generic-mmc-raw
plextor
plextor-scan
ricoh-mp6200
sony-cdu920
sony-cdu948
taiyo-yuden
teac-cdr55
toshiba
yamaha-cdr10x
For all recent recorder models either the 'generic-mmc' or
the 'generic-mmc-raw' driver should work.
Use option '--driver' to force usage of a driver, e.g.: --driver generic-mmc
ERROR: Cannot setup device /dev/hdc.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device /dev/hdc --overburn -n -v 2 --eject --remote 16 /tmp/kde-root/k3bdYwjqa.tmp.cue

root@fred

不好意思，其实很简单，在k3b设备设置就可以了，在cdrdao中原来是auto的改成generic-mmc，原来用鼠标总是没反映，我还以为不能改呢，其实用键盘press"g"，万事大吉！