解决运行gmplayer命令出现的问题

superguru

[root@huanghmlinux root]# gmplayer
MPlayer 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville 1015 MHz (Family: 6, Stepping: 10)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...:
没有那个文件或目录
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没
有那个文件或目录
Reading /usr/local/etc/mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (7649 chars)
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf: 没有那个文件或目录
Input config file /usr/local/etc/mplayer/input.conf parsed: 53 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

Playing /home/cdromdat/vob.vob.
Cache fill:  0.00% (0 bytes)    MPEG-PS file format detected.
VIDEO:  MPEG2  720x480  (aspect 2)  29.970 fps  4000.0 kbps (500.0 kbyte/s)
==========================================================================
Trying to force audio codec driver family mp3lib...
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe)  48000 Hz  448.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 56000->192000 (448.0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support and read DOCS/HTML/en/devices.html#xv!
See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
Error opening/initializing the selected video_out (-vo) device.



MPlayer interrupted by signal 2 in module: unknown


不知道为什么不能播放?请高手帮忙?我实在是很菜头一个.

rockylinux

在你的home中，就是root中没有.mplayer目录，你建立一个，没有skin目录，建立一个，在次安装一下，试试！！！
我刚装上，电脑报前几期讲了！！！

linky_fan

mplayer配置文件有问题，是输出部分（It seems there is no Xvideo support for your video card available. ）,或是显卡驱动有问题。 :-)

jiangn

看出错信息好像是显卡的问题,好像是说显卡不支持XV驱动模式,不过这不太可能,除非是相当老的显卡,应该是驱动没装好吧