出现错误－mem_bank 0 has exceed

tomh

[root@localhost uClinux-dist]# skyeye linux-2.4.x/linux
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(gdb) target sim
cpu info: armv3, arm7tdmi, 41007700, fff8ff00
mach info: name at91, mach_init addr 0x8115c58
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Error: mem_bank 0 has exceed mem_num.
"mem_bank" option parameter error!
Connected to the simulator.
(gdb) load
Loading section .init, size 0xa000 vma 0x1000000
段错误

halfyear

好像是你的skyeye.conf配置得有问题，
贴一下你的skyeye.conf吧！

tomh

#skyeye config file sample
cpu: arm7tdmi
mach: at91
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R,  addr=0x01400000, size=0x00400000, file=./boot.rom
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000

halfyear

你用的是哪个版本的skyeye啊？
好像是很老的版本。

tomh

skyeye-v0.2.6

该怎样配置呢？？

halfyear

下载最新版本的skyeye吧
http://gro.clinux.org/projects/skyeye

tomh

换了版本后OK