我照着精华区文章mplayer还是不能放.srt文件

yanlv

只能放英文字幕
按照别人的方法
debian下的mplayer0.91
./configure --enable-freetype --with-win32lib...
make
make install
成功安装候
ln -s /usr/share/fonts/local/simsum.ttc subfont.ttf
在~/.mplayer/config中加入subcp=cp936
在影碟目录下有.srt文件，windows下的realone之类的可以放
mplayer *.avi -unicode依然没有中文字幕连乱码都没有
哪布可能有问题？谢谢
播放时：
donkey:/home/donkey/movie/A.Very.Long.Engagement.2004.FRENCH.DVDSCR.XviD-PROMiSE#
mplayer *.avi -unicode
MPlayer 0.91-3.3.5 (C) 2000-2003 MPlayer Team
CPU: Intel Pentium 4 Xeon Foster (Family: 8, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Reading config file
/home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: 没有那个文件或目 录
Reading /root/.mplayer/codecs.conf: 50 audio & 136 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (200 chars)
Using Linux hardware RTC timing (1024Hz).
Input config file /root/.mplayer/input.conf parsed: 52 binds

Playing pme-avle.fr.scr.avi
Cache fill: 11.43% (958464 bytes) AVI file format detected.
VIDEO: [XVID] 640x256 12bpp 23.98 fps 623.3 kbps (76.1 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0.0" => local display)
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support, and read Xv section of DOCS/video.html !
See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
This file was encoded with XviD build 36
VDec: vo config request - 640 x 256 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2.50:1 - prescaling to correct movie aspect.
VO: [x11] 640x256 => 640x256 Planar YV12 [fs] [zoom]
Using MMX2 for colorspace transform
SwScaler: using unscaled Planar YV12 -> BGR 32-bit special converter
A: 669.0 V: 669.0

yanlv

搞定了，加了-sub *.srt就行了，可是怎么自动加载呢？

jiangn

自动加载：
在~/.mplayer/config文件中加入一行"sub-fuzziness=1"