关于GNOME的问题

1234567890

ML1.2里有带GNOME么? 如果有怎么怎么把默认图形界面由KDE换为GNOME?
不知道是由于我的操作问题还是其他的什么问题, 我的KDE老是崩溃, 感觉以前用蓝点的时候GNOME似乎要稳定些, 不知道各位大虾感觉如何? 通常情况下是哪个图形界面稳定些? 哪个占用的资源(运行是占用的硬件资源和占用的硬盘空间)少些? 哪个对硬件要求低些? 谢谢~!

KDE

我们提供的 xfce 更符合你的要求，但是需要自己配置，仅菜单就够你头疼的！

1234567890

如果我配置好了XFCE是不是可以卸掉现在的KDE或GNOME?
如果可以卸载, 如何卸载?

KDE

“添加删除软件”

1234567890

请问一下XFCE在哪里? 在"程序"菜单里有吗? 谢谢~!

樱家冢

。。。。。。
不是这样的，如果你用KDM登录，选择xfce而非KDE，如果你用startx启动，运行startxfce而非startx。

1234567890

是这样的, 在安装系统的时候我是选择的图形登陆方式, 现在登陆默认的就是KDE, 但是我不知道在哪里把默认图形界面由KDE改为xfce, 请问在哪里改? 怎么改? 谢谢~!

1234567890

我的系统重新运行了xconfig后无法启动图形界面了，配置的时候测试失败。系统正确是识别出了我的显示器、显示卡等，可在测试的时候就提示失败了，请问如何能解决问题？谢谢~！
我原来安装的时候也是这么配置的，而且安装ML1.2final也无法启动图形界面，我是安装的ML1.2RC1的。

rainli

xfce需要你自己下载后再安装，系统默认的没有xfce。

1234567890

请问一下ML1.2的工具盘出了么？听说里面有带XFCE的。我到网上下了一个，发现安装有点问题，老是提示安装的时候出现错误。而且一个一个RPM包的安装非常的不方便，头都搞大了，有没有方便一点的安装方法啊？

1234567890

实在是搞不定了，帮帮忙吧。。。
以下是我安装XFCE4的时候的提示。。。请问有什么办法解决啊，谢谢。。。

<//root/Downloads/xfce-4.2.0/rpm/fdr/dbh-1.0.20-1fdr.i386.rpm';echo RESULT=$?
warning: //root/Downloads/xfce-4.2.0/rpm/fdr/xfwm4-4.2.0-1.i386.rpm: V3 DSA signature: NOKEY, key ID 443e1821
warning: package xfwm4 = 4.2.0-1 was already added, replacing with xfwm4 <= 4.2.0-1
warning: package xfprint = 4.2.0-1 was already added, replacing with xfprint <= 4.2.0-1
warning: package xffm = 4.2.0-1 was already added, replacing with xffm <= 4.2.0-1
warning: package xfdesktop = 4.2.0-1 was already added, replacing with xfdesktop <= 4.2.0-1
warning: package xfce4-panel = 4.2.0-1 was already added, replacing with xfce4-panel <= 4.2.0-1
warning: package xfce4-iconbox = 4.2.0-1 was already added, replacing with xfce4-iconbox <= 4.2.0-1
warning: package xfce-utils = 4.2.0-1 was already added, replacing with xfce-utils <= 4.2.0-1
warning: package xfce-mcs-manager = 4.2.0-1 was already added, replacing with xfce-mcs-manager <= 4.2.0-1
warning: package libxfcegui4 = 4.2.0-1 was already added, replacing with libxfcegui4 <= 4.2.0-1
error: Failed dependencies:
libstartup-notification-1.so.0 is needed by xfwm4-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfprint-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xffm-4.2.0-1.i386
desktop-backgrounds-basic is needed by xfdesktop-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfdesktop-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce4-toys-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce4-session-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce4-panel-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce4-mixer-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce4-iconbox-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce4-appfinder-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce-utils-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfce-mcs-manager-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by xfcalendar-4.2.0-1.i386
libstartup-notification-1.so.0 is needed by libxfcegui4-4.2.0-1.i386
RESULT=40

华铸

不用一个包一个包安装的，你只要将所有的包拷贝到同一个目录，然后起动控制台，改变当前目录到存放包的目录，然后执行rpm -Uvh --force --nodeps *.rpm，安装完毕后，注销你的当前会话，在出现登陆界面时，你就可以从会话中选择“XFCE”了。

但是，我估计你安装成功也没什么用，套用楼上大哥的话，就配置菜单一项就够你受了。