2410跑linux2.6.12.1

stargui

我在自己做的2410板子上跑linux，好像根文件系统有错误，不知道该怎么修改根文件系统才可以

Copy linux kernel from 0x00030000 to 0x30008000, size = 0x001d0000 ... done

zImage magic = 0x016f2818

Setup linux parameters at 0x30000100

linux command line is: "noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0"

MACH_TYPE = 193

NOW, Booting Linux......

Uncompressing Linux.................................................................................... done, booting the kernel.

Linux version 2.6.12.1 ([email protected]) (gcc version 3.4.1) #10 Mon Jun 27 13:44:11 CST 2005

CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Machine: SMDK2410

ATAG_INITRD is deprecated; please update your bootloader.

Memory policy: ECC disabled, Data cache writeback

CPU S3C2410 (id 0x32410000)

S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz

S3C2410 Clocks, (c) 2004 Simtec Electronics

Built 1 zonelists

Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0

irq: clearing subpending status 00000003

irq: clearing subpending status 00000002

PID hash table entries: 512 (order: 9, 8192 bytes)

timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8

Console: colour dummy device 80x30

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 62080KB available (2206K code, 428K data, 100K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

S3C2410: Initialising architecture

NET: Registered protocol family 23

Bluetooth: Core ver 2.7

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics

DMA channel 0 at c4800000, irq 33

DMA channel 1 at c4800040, irq 34

DMA channel 2 at c4800080, irq 35

DMA channel 3 at c48000c0, irq 36

NetWinder Floating Point Emulator V0.97 (double precision)

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

s3c2410 Backlight Driver Initialized.

Console: switching to colour frame buffer device 48x40

fb0: s3c2410fb frame buffer device

S3C2410 RTC, (c) 2004 Simtec Electronics

S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics

s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410

s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410

s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

NFTL driver: nftlcore.c $Revision: 1.97 $, nftlmount.c $Revision: 1.40 $

S3C2410 NAND Driver, (c) 2004 Simtec Electronics

s3c2410-nand: mapped registers at c4a00000

s3c2410-nand: timing: Tacls 10ns, Twrph0 40ns, Twrph1 10ns

NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V 8-bit)

NAND_ECC_NONE selected by board driver. This is not recommended !!

Scanning device for bad blocks

Creating 5 MTD partitions on "NAND 128MiB 3,3V 8-bit":

0x00000000-0x00020000 : "vivi"

0x00020000-0x00030000 : "param"

0x00030000-0x00200000 : "kernel"

0x00200000-0x02000000 : "root"

0x02000000-0x07ffc000 : "jffs"

usb0: Ethernet Gadget, version: Equinox 2004

usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk

usb0: MAC 5e:64:18:aa:70:d2

usb0: HOST MAC 86:f7:43:3e:6a:00

mice: PS/2 mouse device common for all mice

s3c2410-kbd successfully loaded

s3c2410 TouchScreen successfully loaded

Bluetooth: HCI UART driver ver 2.1

Bluetooth: HCI H4 protocol initialized

Bluetooth: HCI BCSP protocol initialized

mmci-s3c2410: probe: mapped sdi_base=c4b80000 irq=37 irq_cd=18 dma=0.

mmci-s3c2410: initialisation done.

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP established hash table entries: 4096 (order: 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

NET: Registered protocol family 1

NET: Registered protocol family 17

Bluetooth: L2CAP ver 2.7

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO (Voice Link) ver 0.4

Bluetooth: SCO socket layer initialized

Bluetooth: RFCOMM ver 1.5

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: BNEP (Ethernet Emulation) ver 1.2

Bluetooth: BNEP filters: protocol multicast

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond: at least one card is busy - trying again.

MMC: sd_app_op_cond locked busy. Probably have broken SD-Card.

Reading data from NAND FLASH without ECC is not recommended

VFS: Mounted root (cramfs filesystem) readonly.

Freeing init memory: 100K

Warning: unable to open an initial console.

tianyubing

你的root区的dev,proc目录必须是可写的