QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1623|回复: 1

我的ThinkPAD出问题了。救我啊。(问题已经解决)

[复制链接]
发表于 2005-11-29 09:58:48 | 显示全部楼层 |阅读模式
我的无线网卡总是加载不上。

我的内核为2.6.14.3 下载的驱动版本为:

ipw2200-1.0.8.tgz
ieee80211-1.1.6.tgz
ipw2200-fw-2.4.tgz


笔记本为Thinkpad r 51


[art@ThinkPad sbin]$ dmesg |grep ipw
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw-2.4-bss_ucode.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:02:02.0 failed with error -5
[art@ThinkPad sbin]$

大家快帮帮我困扰好久了。

我的/etc/hotplug/firmware.agent
记录firmware目录为/lib/firmware,我已经cp了firmware了。不知道为什么总是加载不上。


[art@ThinkPad firmware]$ ls
ipw2200-LICENSE.txt   ipw-2.2-ibss_ucode.fw  ipw-2.4-ibss_ucode.fw
ipw-2.2-boot.fw       ipw-2.4-boot.fw        ipw-2.4-sniffer.fw
ipw-2.2-bss.fw        ipw-2.4-bss.fw         ipw-2.4-sniffer_ucode.fw
ipw-2.2-bss_ucode.fw  ipw-2.4-bss_ucode.fw   LICENSE
ipw-2.2-ibss.fw       ipw-2.4-ibss.fw        未命名文件夹
[art@ThinkPad firmware]$ pwd
/lib/firmware


dmesg的所有内容为:

Linux version 2.6.14.3 (root@ThinkPad) (gcc 版本 4.0.1 20050727 (Red Hat 4.0.1-5 )) #3 PREEMPT Mon Nov 28 01:39:43 CST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff50000 (usable)
BIOS-e820: 000000001ff50000 - 000000001ff67000 (ACPI data)
BIOS-e820: 000000001ff67000 - 000000001ff79000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 130896
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126800 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v002 IBM                                   ) @ 0x000f6df0
ACPI: XSDT (v001 IBM    TP-1R    0x00003130  LTP 0x00000000) @ 0x1ff5a6cd
ACPI: FADT (v003 IBM    TP-1R    0x00003130 IBM  0x00000001) @ 0x1ff5a800
ACPI: SSDT (v001 IBM    TP-1R    0x00003130 MSFT 0x0100000e) @ 0x1ff5a9b4
ACPI: ECDT (v001 IBM    TP-1R    0x00003130 IBM  0x00000001) @ 0x1ff66ebc
ACPI: TCPA (v001 IBM    TP-1R    0x00003130 PTL  0x00000001) @ 0x1ff66f0e
ACPI: BOOT (v001 IBM    TP-1R    0x00003130  LTP 0x00000001) @ 0x1ff66fd8
ACPI: DSDT (v001 IBM    TP-1R    0x00003130 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/1
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1698.757 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513528k/523584k available (2491k kernel code, 9456k reserved, 714k data,  160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3400.26 BogoMIPS (lpj=6800522)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 0 0000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 0000000 0 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0820)
checking if image is initramfs... it is
Freeing initrd memory: 983k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=5
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 2
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 23
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: c0100000-c01fffff
  PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
  IO window: 00004000-000040ff
  IO window: 00004400-000044ff
  PREFETCH window: e8000000-e9ffffff
  MEM window: c2000000-c3ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 4000-8fff
  MEM window: c0200000-cfffffff
  PREFETCH window: e8000000-efffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ  11
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1133142812.028:1): initialized
Total HugeTLB memory allocated, 0
NTFS driver 2.1.24 [Flags: R/O].
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ  11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon Lf
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (53 C)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ  11
[drm] Initialized radeon 1.17.0 20050311 on minor 0:
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 6.0.60-k2
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ  11
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ  11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS424040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 > hda4
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
hdaps: IBM ThinkPad R51 detected.
hdaps: initial latch check good (0x01).
input: AT Translated Set 2 keyboard on isa0060/serio0
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint on isa0060/serio1
hdaps: device successfully initialized.
hdaps: driver successfully loaded.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 3276
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
LID SLPB PCI0 UART PCI1 USB0 USB1 AC9M
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 160k freed
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.6
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ  11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw-2.4-bss_ucode.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ipw2200: probe of 0000:02:02.0 failed with error -5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55444 usecs
intel8x0: clocking to 48000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ  11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ  11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ  11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ  11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ  11
Yenta: CardBus bridge found at 0000:02:00.0 [1014]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
usb 3-2: new low speed USB device using uhci_hcd and address 2
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000086
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ohci1394: $Rev: 1313 $ Ben Collins <[email protected]>
ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ  11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c0215000-c02157ff]  Max  Packet=[2048]
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ieee1394: Host added: ID:BUS[0-00]  GUID[00061b0327014d86]
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [04b3] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda6, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1044216k swap on /dev/hda5.  Priority:-1 extents:1 across:1044216k
NET: Registered protocol family 17
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
NTFS volume version 3.1.
[drm] *ERROR* Process 3159 using kernel context 0
Non-volatile memory driver v1.2
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Unknown key released (translated set 2, code 0x7f on isa0060/serio0).
atkbd.c: Use 'setkeycodes 7f <keycode>' to make it known.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Unknown key released (translated set 2, code 0x7f on isa0060/serio0).
atkbd.c: Use 'setkeycodes 7f <keycode>' to make it known.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.

读了一下ipw2200驱动中的,INSTALL文档。
找到

2. The following error appears in the dmesg kernel ring buffer output:
ipw2200: ipw-2.4-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:02:03.0 failed with error -5

CAUSE: this may be due to any one of the following reasons:
- firmware in wrong location or wrong firmware version. Follow the
instructions in the section LOADING FIRMWARE VIA HOT-PLUG above.
- sysfs may not be mounted. Follow the instructions in the SYSFS section
above.


可是怎么检查 sysfs的正确性呢?,我感觉没有什么问题,
这是我的/etc/fstab

[art@ThinkPad ipw2200-1.0.8]$ cat /etc/fstab
# This file is edited by fstab-sync - see 'man fstab-sync' for details
LABEL=/1 / ext3 defaults 1 1
LABEL=/boot1 /boot ext3 defaults 1 2
/dev/devpts /dev/pts devpts gid=5,mode=620 0 0
/dev/shm /dev/shm tmpfs defaults 0 0
/dev/proc /proc proc defaults 0 0
LABEL=/home /service ext3 defaults 1 2
/dev/sys /sys sysfs defaults 0 0
LABEL=SWAP-hda5 swap swap defaults 0 0
/dev/hdc /media/cdrom auto pamconsole,exec,noauto,managed 0 0


关于版本,对应2.6.14.3需要的是那个版本呢?
 楼主| 发表于 2005-12-1 10:04:37 | 显示全部楼层
问题已经解决了。出在hotplug身上。

一点点尝试出来的,排除了内核配置的错误,排除了fw的版本错误,排除了fstab的问题。最后没办法,只好在hotplug上着原因。发现/etc/hotplug/下的配置文件目录也没有问题,最后决定重新安装hotplug,但是无法只接rpm -e 因为关联太多usb设备文件。于是--nodeps了然后重新apt-get安装。

安装完成后发现atp-get升级后的内核在加载fw时,报错信息有所改变,
于是重新下载2.6.14.3内核,按照楼上提供的.config文件编译,编译后无法启动(原因不明),不管了,在重新编译,逐一配置内核硬件项目,去掉不相关的硬件信息,保留了蓝牙红外hdaps ipw2200 ieee等的支持。完成后启动发现ipw2200终于正常工作了。呵呵,但是重新安装后的ati官方驱动无法加载成功,估计还是内核上的问题。
但是基本上不用linux玩游戏,并且自带升级的内核可以加载ati驱动。

下面提供我的.config
http://www.ftvnet.net/showthread.php?t=9753

相关问题:

http://bbs.chinaunix.net/viewthread.php?tid=658407&extra=page%3D1&page=1

btw:
机器型号:thinkapd r51 juc
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-27 11:07 , Processed in 0.130938 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表