【求助】装完nVIDIA的驱动后无法进入X,晕啊!!!

bloodgogogo

我的显卡是集成的nVIDIA Gefore 6100芯片,装完RH9后可以进入X window,我现在想装显卡驱动,没装驱动前在XF86Config文件中显卡Device那段用的是Driver "vesa"
装完驱动后用的是 Driver "nvidia"
装完驱动后用startx命令就黑屏了,无法进入X window, 我在XF86Config中把Monitor那段的水平和垂直频率调低了也还是远去进入X,还是黑屏!! 请高手帮帮忙啊!!!!!

然后我把XF86Config改回来后可以进入X,进入后我用GUI工具配置显卡,可在驱动列表里却没发现我刚装的nvidia的驱动模块,可是在/usr/X11R6/lib/modules/drivers/目录下却已经有了nvidia_drv.o和nvidia_drv.so这两个模块,不知这个和上面的问题有没有关系呢??
还有我在没装驱动之前用glxgears命令想测试一下现在的显示性能时报错:
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual
真是郁闷死了...............................

我爱DDR

vesa当然没有那些东西拉……

你的驱动版本？

bloodgogogo

nVIDIA-Linux-x86-1.0-7676-pkg1.run
NVIDIA-Linux-x86-1.0-8756-pkg1.run
我试过这两个版本的驱动,还有今天查了一下XFree86的日志文件,把XFree86.setup.log的内容也粘上来:

XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com

        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 P
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/dev/null", Time: Tue May 16 10:53:51 2006
(++) Using config file: "/tmp/@3989.0xf86config"
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

就发现这最后一行的问题!!!!!!!!!!!

volcanosc

把一个叫做Load "dri"的一行注释掉

windwiny

...不换个新版本玩?  RH9..