求关于Redhat 9.0 下USB光电3键滚轮鼠标失灵问题

moyage

刚安装的Redhat 9.0, 安装好后在登陆进入系统后短时间内USB光电3键滚轮鼠标(罗技)由正常突然失灵，不能动，重新插拔后暂时恢复正常，但很快由重现失灵,换一ps/2的三键光电出现同样现象,使用mouseconfig尝试过各种配置，但仍不能解决问题，请问是否还需要在其他配置文件里修改？或该如何解决？
谢谢！！

配置情况：
AMD Athlon XP 3000+
KINGMAX 512 DDR400
ATI X9550 (ati-driver-installer-8.26.18-x86.run)
华硕 nForce 4 A8N5X (NFORCE-Linux-x86-1.0-0306-pkg1.run)
希捷 7200 80G+40G
16XDVD
Windows xp sp2 + Red Hat 9.0

jozhu

把你的/etc/x11/xf86.conf贴出来看看

moyage

这是XF86Config文件的内容:

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier  "DevInputMice"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "LCD-MONITOR"
        DisplaySize  300        230
        HorizSync    30.0 - 60.0
        VertRefresh  55.0 - 75.0
        Option            "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "vesa"
        VendorName  "Videocard vendor"
        BoardName   "VESA driver (generic)"
        VideoRam    16384
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

jozhu

Option "Emulate3Buttons" "no"
把这一行改成yes
2段关于鼠标的都要改啊

moyage

两段均已修改，现象依旧！

是否需要编译升级内核？

jozhu

用不着那么大动作。
改成YES也不行啊，那看来只好把这两行删了。看了下自己的配置文件，没有写这个

另外我建议把这些也注释掉了
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

moyage

在Redhat下还是没法解决，最终将Redhat 9 Update到FC5问题才消失

jozhu

我晕啊。。。