Skyeye运行S3C2410出现段错误,求助~~~~

bobyisland

我的环境 FC4
Skyeye version: skyeye-v1 (skyeye-20051204.tar.bz2)
testsuite version: 2.0(skyeye-testsuite-2.0.tar.bz2)

我安装skyeye时就出现了很多警告,大多是关于指针类型不匹配的警告.不过最后还是在binary文件家下面产生了skyeye文件

解压缩testsuite后,在s3c2410文件家下面有三个文件
       initrd.img skyeye.conf vmlinux
我键入命令
#skyeye -e vmlinux -c skyeye.conf 后出现如下信息:
------------------------- SkyEye -V1.0 ---------------------------
Usage: SkyEye [options] program [program args]
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file        the (ELF executable format)kernel file name.
-d                  in GDB Server mode (can be connected by GDB).
-c config-file      the skyeye configure file name.
-h                  This Help Display
------------------------------------------------------------------
debugmode= 0, filename = skyeye.conf, server TCP port is 12345
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name s3c2410x, mach_init addr 0x8059298
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
dbct info: turn on dbct!
SKYEYE: use arm920t mmu ops
Loaded RAM   ./initrd.img
dbct translate block use memory 0x03ff4ae4 bytes.
exec file "vmlinux"'s format is elf32-little.
load section .init: addr = 0xc0008000  size = 0x0000f000.
load section .text: addr = 0xc0017000  size = 0x000e246c.
load section __ex_table: addr = 0xc00f9470  size = 0x00000978.
not load section __ksymtab: addr = 0xc00f9de8  size = 0x00000000 .
load section .data: addr = 0xc00fa000  size = 0x0000e3e3.
not load section .bss: addr = 0xc0108400  size = 0x00027f90 .
not load section .stab: addr = 0x00000000  size = 0x00326154 .
not load section .stabstr: addr = 0x00000000  size = 0x000e23f0 .
not load section .comment: addr = 0x00000000  size = 0x0000258e .
start addr is set to 0xc0008000 by exec file.
Linux version 2.4.18-rmk7-pxa1 (skyeyeuser@debian) (gcc version 2.95.3 20010315 (release)) #130 Tue Aug 9 19:28:12 CST 2005
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
Warning: bad configuration page, trying to continue
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram initrd=0xc1000000,0x00600000 rw console=tty0 console=ttyS0
Console: colour dummy device 80x30
Calibrating delay loop... 6.40 BogoMIPS
Memory: 64MB = 64MB total
Memory: 58160KB available (905K code, 219K data, 60K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock = 120.000 Mhz, HCLK = 120.000 Mhz, PCLK = 120.000 Mhz
Starting kswapd
ttyS0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS2 at I/O 0x50008000 (irq = 5 is a S3C2410
fbi->map_size:27000, fbi->map_cpu:c4800000
fbi->map_dma:c0140000
Console: switching to colour frame buffer device 30x40
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
段错误

这是什么原因阿?
我刚接触Linux不久, skyeye也是最近才接触,希望大侠能多多指点~~~
  先谢谢了~~~~~~

bobyisland

没人啊~~~~~~

ksh

Please use the latest skyeye version in the http://sourceforge.net/project/showfiles.php?group_id=85554&package_id=88626&release_id=472597