MagicLinux可以Kylix3吗？

Deward · 发表于 2003-4-8 19:41:21

我想在MagicLinux上装Kylix3，但装不了。点击setup.sh后弹出对话框“找不到程序setup.sh”，请问是什么问题？？

cjacker · 发表于 2003-4-8 19:46:34

可以使用。
请在终端里运行setup.sh
比如，使用konsole
进入安装目录
运行
./setup.sh

sejishikong · 发表于 2003-4-8 20:02:19

./setup.sh -m
一定要这样.很正常,除了C++的编译需要修改一点.

Deward · 发表于 2003-4-9 12:51:39

不行啊。当我运行./SETUP.SH 或./SETUP.SH -m，都是如下情况！！
[root@localhost Kylix3]# ./SETUP.SH -m

BORLAND KYLIX 3

Checking dependencies...
Kernel version >= 2.2.0....OK
Glibc version....FAILED

Setup has determined that your system needs an updated version of glibc
(C runtime library). The version of glibc that is required varies by
distribution. Please read the document "PREINSTALL" on this disc.

X11 Server....OK
Libjpeg version >= 6.2.0....OK
Libgtk version >= 1.2.0....OK

Your system does not meet the minimum system requirements.
Setup cannot continue.

llc · 发表于 2003-4-9 13:38:49

[root@llc Kylix3]# ./setup.sh -m

BORLAND KYLIX 3

Checking dependencies...
Kernel version >= 2.2.0....OK
Glibc version >= 2.1.2....OK
X11 Server....OK
Libjpeg version >= 6.2.0....OK
Libgtk version >= 1.2.0....OK

jbtzhm · 发表于 2003-4-9 16:29:14

今天刚装的，好用。
./setup.sh -m
安装后下载
kylix3-rh8-include_patch.tar

其实里面就是四个头文件，因为redhat8自带的头文件编译有问题。

樱家冢 · 发表于 2003-4-9 19:50:42

[quote:24879b3c8a="Deward"]不行啊。当我运行./SETUP.SH 或./SETUP.SH -m，都是如下情况！！
[root@localhost Kylix3]# ./SETUP.SH -m

BORLAND KYLIX 3

Checking dependencies...
Kernel version >= 2.2.0....OK
Glibc version....FAILED

Setup has determined that your system needs an updated version of glibc
(C runtime library). The version of glibc that is required varies by
distribution. Please read the document "PREINSTALL" on this disc.

X11 Server....OK
Libjpeg version >= 6.2.0....OK
Libgtk version >= 1.2.0....OK

Your system does not meet the minimum system requirements.
Setup cannot continue.[/quote]

你的Glibc 版本有问题吧？用rpm -q glibc看看输出信息？

wangjin126 · 发表于 2003-4-10 08:40:45

我使用命令./setup.sh -m 出现
root@localhost Kylix3]# ./setup.sh -m
bash: ./setup.sh: Permission denied
谁能帮帮我，我很想试试Kylix

wangjin126 · 发表于 2003-4-10 08:53:30

在编程天空专版发现在Mgic linux需用命令 sh setup.sh -m 才行

sejishikong · 发表于 2003-4-10 09:01:37

另外，关于编译出错的问题，不用覆盖头文件，只要改下环境变量就行了。
project->Options->Directories/Conditionals->include path:
中的$(BCB)/include/stlport:$(BCB)/include:$(BCB)/include/vcl:/usr/include
改为/usr/include:$(BCB)/include/stlport:$(BCB)/include:
$(BCB)/include/vcl

haobus · 发表于 2003-4-10 09:29:42

C++用起方便不？说说感受嘛

		自动登录	找回密码
密码			注册

MagicLinux可以Kylix3吗？

为什么我装不上Kylix3

刚发现怎么装