suse10.1 ati_x700驱动安装失败！[动画公司]

oasis3322

今天把公司一台机器安装了suse10.1，装完系统后把x700驱动安装上，结果发现3D加速没打开，卸载fglrx……  折腾半天再次安装驱动，报错如下：
Homyzpower:/home/homyz/drivers # ./ati-driver-installer-8.34.8-x86.x86_64.run --listpkg
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.34.8..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
List of generatable packages:

Package Maintainer(s): Aric Cyr <[email protected]>
Status: Verified
Debian Packages:
        Debian/sarge
        Debian/stable
        Debian/sid
        Debian/unstable
        Debian/etch
        Debian/testing
        Debian/experimental

Package Maintainer(s): Niko Mirthes <[email protected]>
                      Michael Larabel <[email protected]>
Status: Verified
Fedora Packages:
        Fedora/FC3
        Fedora/FC4
        Fedora/FC5
        Fedora/FC6
        Fedora/F7
        Fedora/RHEL3
        Fedora/RHEL4

Package Maintainer(s): Arnaud Patard <[email protected]>
Status: Verified
Mandriva Packages:
        Mandriva/2006
        Mandriva/2007

Package Maintainer(s): Bowen Zhu <[email protected]>
Status: *UNVERIFIED*
RedFlag Packages:
        RedFlag/RF50

Package Maintainer(s): ATI
Status: Verified
RedHat Packages:
        RedHat/RHEL3
        RedHat/RHEL3_64a
        RedHat/RHEL4
        RedHat/RHEL4_64a

Package Maintainer(s): Stefan Dirsch <[email protected]>
Status: Verified
SuSE Packages:
        SuSE/NLD9-IA32
        SuSE/SLES9-IA32
        SuSE/SUSE91-IA32
        SuSE/NLD9-AMD64
        SuSE/SLES9-AMD64
        SuSE/SUSE91-AMD64
        SuSE/SUSE100-IA32
        SuSE/SUSE92-IA32
        SuSE/SUSE93-IA32
        SuSE/SUSE100-AMD64
        SuSE/SUSE92-AMD64
        SuSE/SUSE93-AMD64
        SuSE/SLED10-IA32
        SuSE/SLES10-IA32
        SuSE/SUSE101-IA32
        SuSE/SLED10-AMD64
        SuSE/SLES10-AMD64
        SuSE/SUSE101-AMD64
        SuSE/SUSE102-IA32
        SuSE/SUSE102-AMD64

Package Maintainer(s): Aric Cyr <[email protected]>
Status: Verified
Ubuntu Packages:
        Ubuntu/warty
        Ubuntu/4.10
        Ubuntu/hoary
        Ubuntu/5.04
        Ubuntu/breezy
        Ubuntu/5.10
        Ubuntu/dapper
        Ubuntu/6.06
        Ubuntu/edgy
        Ubuntu/6.10

For example, to build a Debian Etch package, run the following:
% ./ati-driver-installer-<version>-<architecture>.run --buildpkg Debian/etch

Removing temporary directory: fglrx-install
Homyzpower:/home/homyz/drivers # ./ati-driver-installer-8.34.8-x86.x86_64.run --
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.34.8...............................
................................................................................
................................................................................
................................................................................
.......................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: SuSE/SUSE101-AMD64
/tmp/ati.kF6410
Package /home/homyz/drivers/fglrx64_6_9_0_SUSE101-8.34.8-1.x86_64.rpm has been s
Removing temporary directory: fglrx-install
Homyzpower:/home/homyz/drivers # rpm -ivh fglrx64_6_9_0_SUSE101-8.34.8-1.x86_64.
rpm
Preparing...                ########################################### [100%]
   1:fglrx64_6_9_0_SUSE101  ########################################### [100%]
/usr/src/kernel-modules/fglrx /
rm: cannot remove `Modules.symvers': No such file or directory
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.ko': No such file or directory
rm: cannot remove `*.mod.*': No such file or directory
make: Entering directory `/usr/src/linux-2.6.16.13-4-obj/x86_64/default'
make -C ../../../linux-2.6.16.13-4 O=../linux-2.6.16.13-4-obj/x86_64/default
  LD      /usr/src/kernel-modules/fglrx/built-in.o
  CC [M]  /usr/src/kernel-modules/fglrx/firegl_public.o
/usr/src/kernel-modules/fglrx/firegl_public.c:474: warning: initialization from
incompatible pointer type
/usr/src/kernel-modules/fglrx/firegl_public.c: In function ‘firegl_put_user_ptr’
:
/usr/src/kernel-modules/fglrx/firegl_public.c:1375: warning: cast from pointer t
o integer of different size
/usr/src/kernel-modules/fglrx/firegl_public.c:1375: warning: cast from pointer t
o integer of different size
/usr/src/kernel-modules/fglrx/firegl_public.c:1375: warning: cast from pointer t
o integer of different size
/usr/src/kernel-modules/fglrx/firegl_public.c:1375: warning: cast from pointer t
o integer of different size
/usr/src/kernel-modules/fglrx/firegl_public.c: In function ‘__ke_unregister_ioct
l32_conversion’:
/usr/src/kernel-modules/fglrx/firegl_public.c:2698: warning: ‘return’ with a val                                                           ue, in function returning void
/usr/src/kernel-modules/fglrx/firegl_public.c: In function ‘KAS_SlabCache_Initia                                                           lize’:
/usr/src/kernel-modules/fglrx/firegl_public.c:4880: warning: cast from pointer t                                                           o integer of different size
/usr/src/kernel-modules/fglrx/firegl_public.c: In function ‘KAS_ExecuteAtLevel’:
/usr/src/kernel-modules/fglrx/firegl_public.c:4726: warning: ‘flags’ may be used                                                            uninitialized in this function
  LD [M]  /usr/src/kernel-modules/fglrx/fglrx.o
  Building modules, stage 2.
  MODPOST
WARNING: could not find /usr/src/kernel-modules/fglrx/.libfglrx_ip.a.GCC4.cmd fo                                                           r /usr/src/kernel-modules/fglrx/libfglrx_ip.a.GCC4
  CC      /usr/src/kernel-modules/fglrx/fglrx.mod.o
  LD [M]  /usr/src/kernel-modules/fglrx/fglrx.ko
make: Leaving directory `/usr/src/linux-2.6.16.13-4-obj/x86_64/default'
make: Entering directory `/usr/src/linux-2.6.16.13-4-obj/x86_64/default'
make -C ../../../linux-2.6.16.13-4 O=../linux-2.6.16.13-4-obj/x86_64/default mod                                                           ules_install
  INSTALL /usr/src/kernel-modules/fglrx/fglrx.ko
  DEPMOD  2.6.16.13-4-default
make: Leaving directory `/usr/src/linux-2.6.16.13-4-obj/x86_64/default'
/

*************************************************************
Please read "/usr/share/doc/packages/fglrx/README.SuSE" for
configuration details when using SaX2.
*************************************************************
后来再也无法装上了！

公司为动画传媒公司一直以来都在winxp+maya下工作，后来同事提议装台linux+maya熟悉下环境，结果MAYA是装上了，3D加速未开启，那个运行速度真是慢的可以。由于菜鸟本人以前接触过linux，于是承担了安装的全部工作。谢谢各路大侠一定帮下我，linux的普及就从这里开始了！！    万分感谢ing!!

bigbighill

参考这里
http://www.linuxsir.org/bbs/showthread.php?t=256583