搞了一个月，skyeye+uclinux还是没有运行起来？

netfarming

用testsuit2里的skyeye提示说找不到libbfd-2.16.91.so,
然后发现／usr/lib 中有libbfd-2.17.50.0.3-6.so
ln -s libbfd-2.17.50.0.3-6.so libbfd-2.16.91.so
在at91测试目录中运行，出现如下：
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x80650d0
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
SKYEYE: use arm7100 mmu ops
Loaded ROM   ./romfs.img
exec file "linux"'s format is elf32-little.
段错误


用testsuit2里的skyeye运行自己编译的uclinux2005(linux2.4.x +uClibc),出现如下：
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x80650d0
can't find device module: (null)
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/romfs.img
exec file "linux-2.4.x/linux"'s format is elf32-little.
段错误

自己编译skyeye-v1 make NO_BFD=1，运行自己编译的uclinux 2005(linux2.4.x +uClibc)
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8059ba0
can't find device module: (null)
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/romfs.img
就不动了
甚至出现终端死掉，之后不管如何，就是没法运行
试试linux-2.0.x出错、linux-2.6.x也出错
就2.4.x编译不出错，但总是停在Loaded ROM   images/romfs.img
或者停在start 0X0100000之类，

尝试uClinux2004版本旧一点，应该好运行，还是不行，试了无数次，还是不行，

于是下了一个uClinux-2007即最新的包,编译也是错误一大堆，解决一个，还有另一个，别提用skyeye模拟了，不能编译成功


用自己编译的skyeye_1_2_2_Rel运行uClinux20051110中的linux-2.4.x （库为uClibc）,结果是失望的
[root@li uClinux-dist]# ../skyeye_1_2_2_Rel/binary/skyeye -e linux-2.4.x/linux
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8056d50
uart_mod:0, desc_in:, desc_out:
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/romfs.img
start addr is set to 0x01000000 by exec file.
停这里不动了。

当选库为uC-lic时，结果还是失望的
arm/clone.S: Assembler messages:
arm/clone.S:34: Error: undefined symbol `EINVAL' in operation
make[3]: *** [arm/clone.o] 错误 1
make[3]: Leaving directory `/uclinux/uClinux-dist/lib/libc/sysdeps'
make[2]: *** [subdirs] 错误 1
make[2]: Leaving directory `/uclinux/uClinux-dist/lib/libc'
make[1]: *** [all] 错误 2
make[1]: Leaving directory `/uclinux/uClinux-dist/lib'
make: *** [subdirs] 错误 1

于是添加一行
＃define EINVAL 22

boa.elf2flt(.text+0xc6d: more undefined references to `__syscall_error' follow
collect2: ld returned 1 exit status
make[3]: *** [boa] 错误 1
make[3]: Leaving directory `/uclinux/uClinux-dist/user/boa/src'
make[2]: *** [all] 错误 2
make[2]: Leaving directory `/uclinux/uClinux-dist/user/boa'
make[1]: *** [all] 错误 2
make[1]: Leaving directory `/uclinux/uClinux-dist/user'
make: *** [subdirs] 错误 1

到网上也没有找到解决办法，也是一大堆错误，建议skyeye和uClinux项目换人，这些人的make功底不深,

ksh

We always welcome more developer to join skyeye team. You can refer to the following URL to run your uClinux image:
http://www.mail-archive.com/[email protected]/msg00874.html

netfarming

终于运行起来了，先总结一下，
等思路清晰了，发个帖子

patwang

兄弟思路清晰了没，发个总结帖子吧，我的问题和你的一样。