magic2.0无法识别我的三星80G移动硬盘

balala

怎么办?记得以前1.1的时候出过一个真对usb的模块,2.0下能这样做吗?

lanzinc

lsusb 看看输出，再判断是什么问题
结合lsmod

如果usb2ide控制器有识别，并加载了内核模块
再 fdisk -l 看看分区情况。

balala

用lsusb看了,没认出来.用 dmesg,查看,能发现,但报错.
usb 1-2: new high speed USB device using ehci_hcd and address 3
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
  Vendor: SAMSUNG   Model: HM080HC           Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: assuming drive cache: write through
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: assuming drive cache: write through
sdb:<6>sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
printk: 8 messages suppressed.
Buffer I/O error on device sdb, logical block 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
sd 2:0:0:0: Attached scsi disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301312
Buffer I/O error on device sdb, logical block 19537664
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301312
Buffer I/O error on device sdb, logical block 19537664
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301232
Buffer I/O error on device sdb, logical block 19537654
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301232
Buffer I/O error on device sdb, logical block 19537654
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301232
Buffer I/O error on device sdb, logical block 19537654
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301088
Buffer I/O error on device sdb, logical block 19537636
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 156301088
Buffer I/O error on device sdb, logical block 19537636
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 8
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 16
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 24
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 32
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 40
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 48
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 56
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 64
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 72
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 80
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 88
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 96
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 104
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 112
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 120
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 128
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 136
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 144
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 152
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 160
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 168
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 176
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 184
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 192
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 200
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 208
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 216
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 224
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 232
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 240
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 248
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 256
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
printk: 57 messages suppressed.
Buffer I/O error on device sdb, logical block 0
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 8
Buffer I/O error on device sdb, logical block 1
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 16
Buffer I/O error on device sdb, logical block 2
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 24
Buffer I/O error on device sdb, logical block 3
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 32
Buffer I/O error on device sdb, logical block 4
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 40
Buffer I/O error on device sdb, logical block 5
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 48
Buffer I/O error on device sdb, logical block 6
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 56
Buffer I/O error on device sdb, logical block 7
sd 2:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0

lanzinc

看样子USB2IDE控制器没问题
硬盘也被认成了sdb
但接下来的IO有问题。分区问题，磁盘表面问题，还是供电供不上，我就不太懂了

如果能查一查 SCSI模块接到 0x10070000 意味着什么，也许就明白了

balala

说供电跟不上吧,windows下没问题. 说分区格式吧,fat32\ntfs,一个区,2个区都试了,都这样.完全格式化也没见啥错误.