skyeye运行s3c44b0 的uclinux出错

sanlybeen

(SkyEye) run
Starting program: /home/sam/test/linux
Linux version 2.6.9-hsc0 ([email protected]) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #518 Thu Mar 6 11:32:06 CST 2008
CPU: Samsung-S3C44B0x [44b07700] revision 0 (ARMv4T)
Machine: S3C44B0X Development Board
Built 1 zonelists
Kernel command line: root=/dev/ram0 initrd=0x0c191b7c,926k keepinitrd
PID hash table entries: 64 (order: 6, 1024 bytes)
drivers/serial/serial_s3c44b0.c:626 __s3c44b0_console_init
drivers/serial/serial_s3c44b0.c:594 __s3c44b0_console_setup
this is in drivers/serial/serial_s3c44b0.c:335 __s3c44b0_initdivisor=32divisor=32
SKYEYE: WARNING: illegal write word to 0x0 of 0x0 @ 0xc0086d8
SKYEYE: WARNING: illegal write word to 0x0 of 0x0 @ 0xfffff00c
SKYEYE: WARNING: illegal write word to 0x0 of 0x0 @ 0xfffff00c
SKYEYE: WARNING: illegal write word to 0x0 of 0x0 @ 0xfffff00c
另外我的skyeye。conf为
cpu: arm7tdmi
mach: s3c44b0
mem_bank: map="M", type="R", addr="0x00000000", size="0x00200000"
mem_bank: map="M", type="RW", addr="0x0C000000", size="0x00800000",file=romfs.img
mem_bank: map="I", type="RW", addr="0x01c00000", size="0x00400000"  

不知道具体什么地方出错，还请高手指点

AnthonyLee

0x00000000 开始处必须有 bootloader