FEDROA8升级内核到kernel-2.6.24.4-64.fc8开机启动问题

kyxlq

FEDROA8升级内核到kernel-2.6.24.4-64.fc8开机启动问题

如题升级后开机出现如下错误，请问该怎么解决？
classfication failed assuming ATA
resetfailed (errno:-22) retrying in 10 secs
failed to IDENTIFY

系统刚安装是好的版本kernel-devel-2.6.23.1-42.fc8，启动正常，升级后启动超慢，此错误要循环等待3分钟后可以正常启动
原先的版本可以正常启动
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You do not have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /, eg.
#          root (hd0,0)
#          kernel /boot/vmlinuz-version ro root=/dev/sda1
#          initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.23.1-42.fc
        root (hd0,0)
        kernel /boot/vmlinuz-2.6.23.1-42.fc8 ro root=LABEL=/ rhgb quiet
        initrd /boot/initrd-2.6.23.1-42.fc8.img
title Fedora (2.6.24.4-64.fc
        root (hd0,0)
        kernel /boot/vmlinuz-2.6.24.4-64.fc8 ro root=LABEL=/ rhgb quiet
        initrd /boot/initrd-2.6.24.4-64.fc8.img

[ 本帖最后由 kyxlq 于 2008-4-7 20:07 编辑 ]

kyxlq

这是附图

kyxlq

大侠们，帮帮我吧，是不是对P35主板支持不好阿