skyeye模拟饿殍7312出现的问题

qq425887742

[root@www test_kernel]# /root/skyeye-1.2.4/binary/skyeye  -e vmlinux -c skyeye1.conf~
big_endian is false.
arch: arm
cpu info: armv4, arm720t, 41807200, ffffff00, 1
mach info: name ep7312, mach_init addr 0x8058ce0
log_info: log is off.
log_info:log file is /tmp/test.log, fd is 0x9c97198
log_info: log start clock 5000000
log_info: log end clock 6000000
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm7100 mmu ops
Loaded RAM   ./initrd
Loaded RAM   ./vmlinux
start addr is set to 0xc0028000 by exec file.
Linux version 2.4.18-rmk7 ([email protected]) (gcc version 2.95.3 20010315 (release)) #2 2008年 04月 19日 星期六 19:30:43 CST
CPU: ARM ARM720T revision 0
Machine: Cirrus Logic 7212/7312
Warning: bad configuration page, trying to continue
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram,console=ttyAM0
Calibrating delay loop... 26.00 BogoMIPS
Memory: 16MB = 16MB total
Memory: 12852KB available (935K code, 200K data, 52K init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
ttyAM0 at I/O 0x100 (irq = 12) is a CLPS711x
ttyAM1 at I/O 0x1100 (irq = 2 is a CLPS711x
pty: 256 Unix98 ptys configured
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 2048K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 52K
attempt to access beyond end of device
01:00: rw=0, want=1647259183, limit=4096
attempt to access beyond end of device
01:00: rw=0, want=1647259183, limit=4096
attempt to access beyond end of device
01:00: rw=0, want=2037609827, limit=4096
attempt to access beyond end of device
01:00: rw=0, want=2037609827, limit=4096
Kernel panic: No init found.  Try passing init= option to kernel.
[root@www test_kernel]# mount -o loop /root/test_kernel/initrd  /mnt/img
[root@www test_kernel]# umount initrd
[root@www test_kernel]# skyeye
***************************************************************
****                                                       ****
****   SkyEye  Simulator Ver 0.8.0 with  GDB 5.3 Interface ****
****                                                       ****
***************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf".
(SkyEye) file vmlinux
Reading symbols from vmlinux...(no debugging symbols found)...done.
(SkyEye) target sim
cpu info: armv4, arm720t, 41807200, ffffff00, 1
mach info: name ep7312, mach_init addr 0x815e920
SKYEYE: use arm7100 mmu ops
Loaded ROM ./initrd
Connected to the simulator.
(SkyEye) load
Loading section .init, size 0xd000 vma 0xc0028000
Loading section .text, size 0xe9f34 vma 0xc0035000
Loading section __ex_table, size 0x810 vma 0xc011ef40
Loading section .data, size 0xc818 vma 0xc0120000
Start address 0xc0028000
Transfer rate: 8518368 bits in <1 sec.
(SkyEye) run
Starting program: /root/test_kernel/vmlinux
Linux version 2.4.18-rmk7 ([email protected]) (gcc version 2.95.3 20010315 (release)) #2 2008年 04月 19日 星期六 19:30:43 CST
CPU: ARM ARM720T revision 0
Machine: Cirrus Logic 7212/7312
Warning: bad configuration page, trying to continue
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram,console=ttyAM0
Calibrating delay loop... 26.00 BogoMIPS
Memory: 16MB = 16MB total
Memory: 12852KB available (935K code, 200K data, 52K init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
ttyAM0 at I/O 0x100 (irq = 12) is a CLPS711x
ttyAM1 at I/O 0x1100 (irq = 2 is a CLPS711x
pty: 256 Unix98 ptys configured
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 2048K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 52K
attempt to access beyond end of device //什么意思
01:00: rw=0, want=1647259183, limit=4096
attempt to access beyond end of device
01:00: rw=0, want=1647259183, limit=4096
attempt to access beyond end of device
01:00: rw=0, want=2037609827, limit=4096
attempt to access beyond end of device
01:00: rw=0, want=2037609827, limit=4096
Kernel panic: No init found.  Try passing init= option to kernel.
到此就不往下运行了，请问什么原因，恳请帮忙