ML2.0 DRCOM使用请教！

deltta

按照论坛发帖，使用ML2.0自带drcom，修改/etc/drcom. conf文件，及操作提示如下：
# Username and password
# A blank password is considered valid.
[email protected]
password=******

# Interface information

# mac is the MAC address of the nic we use to connect
# to the server.
# Example:
# mac=1a:2b:3c:4d:5e:6f
# If left blank it will default to 00:00:00:00:00:00

mac=00:0d:60:cd:ff:ff

# nicn is the nth nic. This is the real data that's
# passed to the server, and thus I suggest you only
# fill in the first nic.
# Example:
# nic0=192.168.0.1
# nic1=
# nic2=
# nic3=
# Only nic0 is mandatory; the others should normally
# be left blank.

nic0=192.168.78.48
nic1=
nic2=
nic3=

# dnsp(rimary) and dnss(econdary).

dnsp=211.70.96.20
dnss=211.70.96.20

# dhcp server address. Windows XP uses 255.255.255.255
# and Windows 2000 uses 0.0.0.0
# If left blank it defaults to 255.255.255.255

dhcp=211.70.96.3

# Connection information
# If the network supports it, and serverip is set
# to 1.1.1.1, then the gateway will help us find
# the real server (beex said this was the reason
# why we had to upgrade, but I don't see the
# practical reason why)
# All are optional, if left blank, then:
# + hostip defaults to nic0
# + servip defaults to 1.1.1.1
# + hostport defaults to 61440 (0xf000)
# + servport defaults to 61440 (0xf000)
# Note: hostip can be given one of the special values
#       eth0, eth1, eth2, ... eth9 (I don't think
#       regular users would need eth10 :-P), which
#       corresponds to the inet address of the
#       interface.

hostip=
servip=192.168.255.1
hostport=
servport=

# Miscellaneous Machine Information
# We don't need to be honest about these.
# For example, Windows XP has a version number
# of 5.1 and a build number of 2600.
# All are optional, if left blank, then:
# + hostname defaults to "localhost"
# + winver defaults to 5.1
# + winbuild defaults to 2600
# + servicepack defaults to "Service Pack 2"

hostname=
winver=
winbuild=
servicepack=
##############################################
ip、dns、dhcp、serip数据都是在XP下使用的。

#############################################
[root@AIT ~]# drcomcd
1210237366 DEBUG drcomcd: Redirecting stderr to /var/log/drcomcd...
2742 pts/1    00:00:00 drcomcd               //出现这种提示应该就可以了吧？

[root@AIT ~]# drcomc login
1210237372 DEBUG drcomc: Creating socket...
1210237372 DEBUG drcomc: Connecting...
1210237372 DEBUG drcomc: Sending login command...
1210237372 DEBUG drcomc: Receiving reply (login)...
Login failed
Reason: 0                                          //连接不上是什么原因，会不会是登陆服务器的问题？在windows用的drcom客户端是3.70版本