skyeye安装出错，牛人帮忙看看

heqinzhang

安装skyeye，  在skyeye-1.2.4/binary下生成了可执行文件skyeye

    big_endian is false.
    Failed to open skyeye config file skyeye.conf in the same directory
    error: No such file or directory
    ------------------------- SkyEye -V1.2 ---------------------------
    Usage: SkyEye [options] -e program [program args]
    Default mode is STANDALONE mode
    ------------------------------------------------------------------
    Options:
    -e exec-file        the (ELF executable format)kernel file name.
    -l load_address,load_address_mask
                    Load ELF file to another address, not its entry.
    -b                  specify the data type is big endian when non "-e" option.
    -d                  in GDB Server mode (can be connected by GDB).
    -c config-file      the skyeye configure file name.
    -h                  The SkyEye command options, and ARCHs and CPUs simulated.
    ------------------------------------------------------------------
    ----------- Architectures and CPUs simulated by SkyEye-------------
    -------- ARM architectures ---------
    at91
    lpc
    s3c4510b
    s3c44b0x
    s3c44b0
    s3c3410x
    ep7312
    lh79520
    ep9312
    cs89712
    sa1100
    pxa_lubbock
    pxa_mainstone
    at91rm92
    s3c2410x
    s3c2440
    sharp_lh7a400
    ns9750
    lpc2210
    ps7500
    integrator
    -------- BlackFin architectures ----
    bf533
   
    出现如上。编译uclinxu也make成功。但是skyeye -e linux-2.4.x/linux时是这样的
big_endian is false.
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8057550
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/romfs.img
start addr is set to 0x01000000 by exec file.
Linux version 2.4.31-uc0 (root@eda-desktop) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1 2008年 12月 28日 星期日 16:16:46 CST
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2900KB available (913K code, 185K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-151A3FF [VIRTUAL 1400000-151A3FF] (RO) <ROMFS>
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
SkyEye NE2k Ethernet driver version 0.2 (2003-04-27)
sene2k dev name: eth0: <6>NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: ��

��
: No such file or directory

Sash command shell (version 1.1.1)
/>

请教是哪出错了！我看成功的是最后几行是这样的
Shell invoked to run file: /etc/rc
    Command: hostname GDB-ARMulator
    Command: /bin/expand /etc/ramfs.img /dev/ram0
    Command: mount -t proc proc /proc
    mount: /etc/mtab: Read-only file system
    Command: mount -t ext2 /dev/ram0 /var
    mount: /etc/mtab: Read-only file system
    Command: mkdir /var/tmp
    Command: mkdir /var/log
    Command: mkdir /var/run
    Command: mkdir /var/lock
    Command: mkdir /var/empty
    Command: cat /etc/motd
    Welcome to
                ____ _ _
              / __| ||_|               
    _   _| | | | _ ____ _   _ _ _
    | | | | | | || | _ \| | | |\ \/ /
     | |_| | |__| || | | | | |_| |/    \
    | ___\____|_||_|_| |_|\____|\_/\_/
    | |
    |_|