linux-2.6.22.1编译错误，急！！！在线等解答！！

vannike

主机平台及所需所的源代码
ubantu 8.10
arm-linux-tools-20070808.tar.gz
linux-2.6.22.1.tar.bz2
skyeye-testsuite-1.2.5
skyeye-1.2.5_Rel.tar.gz

我按照了http://www.linuxfans.org/bbs/thread-182101-1-1.html这里每一步骤的操作，到最后skyeye -e vmlinux 的时候出现错误

vannike@vannike-laptop:~/linux-2.6.22.1$ skyeye -e vmlinux
big_endian is false.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name s3c2410x, mach_init addr 0x805f030
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
tapif_initpen: Permission denied
-----------------------------------------------------------
NOTICE: you should be root at first !!!
NOTICE: you should inmod linux kernel net driver tun.o!!!
NOTICE: if you don't make device node, you should do commands:
NOTICE:    mkdir /dev/net; mknod /dev/net/tun c 10 200
NOTICE: now the net simulation function can not support!!!
NOTICE: Please read SkyEye.README and try again!!!
-----------------------------------------------------------
failed to setup_module (name:net, type:cs8900a)
lcd_mod:1
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM   ./initrd.img
start addr is set to 0xc0008000 by exec file.
Linux version 2.6.22.1 (vannike@vannike-laptop) (gcc version 4.2.1) #1 Sun Mar 1 15:21:30 HKT 2009
CPU: ARM920T [41009200] revision 0 (ARMvundefined/unknown), cr=00003177
Machine: SMDK2410
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
initrd (0x00800000 - 0x01000000) extends beyond physical memory - disabling initrd
CPU S3C2410 (id 0x32410000)
S3C2410: core 62.400 MHz, memory 62.400 MHz, peripheral 62.400 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists.  Total pages: 8128
Kernel command line: mem=32M console=ttySAC0 root=/dev/ram initrd=0x0800000,0x0800000 ramdisk_size=2048 rw
PID hash table entries: 128 (order: 7, 512 bytes)
timer tcon=00000000, tcnt cb1f, tcfg 00000200,00000000, usec 0000189e
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 29268KB available (2740K code, 307K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C2410 Power Management, (c) 2004 Simtec Electronics
S3C2410: Initialising architecture
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c2800000, irq 33
DMA channel 1 at c2800040, irq 34
DMA channel 2 at c2800080, irq 35
DMA channel 3 at c28000c0, irq 36
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
s3c2410-lcd s3c2410-lcd: no platform data for lcd, cannot attach
s3c2410-lcd: probe of s3c2410-lcd failed with error -22
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
loop: module loaded
dm9000 Ethernet Driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
BAST NOR-Flash Driver, (c) 2004 Simtec Electronics
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2410-nand s3c2410-nand: Tacls=2, 32ns Twrph0=4 64ns, Twrph1=2 32ns
ERROR: s3c2410x_io_write_word(0x4e000000) = 0x00008131
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
ERROR: s3c2410x_io_write_word(0x4e000004) = 0x00000090
ERROR: s3c2410x_io_write_word(0x4e00000 = 0x00000000
No NAND device found!!!
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xffffffff
usbmon: debugfs is not available
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
ERROR: s3c2410x_io_write_word(0x49000010) = 0x40000000
ERROR: s3c2410x_io_write_word(0x4900000 = 0x00000008
s3c2410-ohci s3c2410-ohci: USB HC takeover failed!  (BIOS/SMM bug)
s3c2410-ohci s3c2410-ohci: startup error -16
s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
s3c2410-ohci: probe of s3c2410-ohci failed with error -16
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
ERROR: s3c2410x_io_write_word(0x5400000 = 0x00000010
s3c2410-i2c s3c2410-i2c: slave address 0x10
s3c2410-i2c s3c2410-i2c: bus frequency set to 390 KHz
ERROR: s3c2410x_io_write_word(0x54000000) = 0x000000a9
s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
TCP cubic registered
NET: Registered protocol family 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
List of all partitions:
No filesystem could mount root, tried:  ext3 ext2 cramfs msdos vfat romfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)

谁能解答一下啊？

[ 本帖最后由 vannike 于 2009-3-1 19:48 编辑 ]