|
楼主 |
发表于 2009-7-20 00:05:02
|
显示全部楼层
刚刚参考精华区的这个帖子
http://www.linuxfans.org/bbs/vie ... p%3Bfilter%3Ddigest
skyeye.conf的内容如下
cpu: arm7tdmi
mach: at91
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R, addr=0x01400000, size=0x00400000, file=images/romfs.img
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000
lcd: state=on
---------------------------------
结果看似成功了,一直到如下一句的提示都和这个帖子里的是一样的。
start addr is set to 0x01000000 by exec file.
很激动的等了几十秒钟后仍然不停的出现如下的提示:
Bus read error, can not find corresponding bank for addr 0x13e34,pc=0x13e34
[ 本帖最后由 Jedi2000 于 2009-7-20 00:07 编辑 ] |
|