QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 3212|回复: 13

intel 的郁闷

[复制链接]
发表于 2009-12-8 22:56:24 | 显示全部楼层 |阅读模式
最近新买的电脑,intel 显卡

vesa 可以进图形界面,但是分辨率真是恶心..........
更新 intel 驱动的 rpm 后,X 启动异常,黑屏,而且 ctrl+alt+fn 切换不到控制台......只好重启。。

intel 声卡可以识别,但是没有声音....

目前安装着 fedora 12,十分良好哦。
望下一个版本有所改善啦
发表于 2009-12-8 23:25:57 | 显示全部楼层
太好了,终于有人有intel显卡了.
你来测试下吧,我猜测有可能的几个原因,一是内核中的intel显卡支持,主要是30的,我打算在正式版本中用2.6.30.10这个.一是xorg-server,fc12应该是1.7吧,你试试magic升级到1.7行不行,或者降到1.6.3?一是intel的驱动,用最新的,或者降回到2.8以下看看.我没有intel的显卡,这个测试太麻烦.
回复

使用道具 举报

 楼主| 发表于 2009-12-8 23:45:54 | 显示全部楼层
普通账户 startx &> log.txt
听到机器“滴”的一声然后就黑屏,按键无反应,只能按电源按钮关机重启...........

  1. xauth:  creating new authority file /home/nihui/.serverauth.3186


  2. X.Org X Server 1.6.5
  3. Release Date: 2009-10-11
  4. X Protocol Version 11, Revision 0
  5. Build Operating System: Linux 2.6.31.5-smp i686
  6. Current Operating System: Linux MagicLinux 2.6.31.6-smp #1 SMP Wed Nov 11 22:06:01 CST 2009 i686
  7. Kernel command line: ro root=/dev/sda8 vga=791 quiet splash=silent,fadein,theme:default console=tty1 3
  8. Build Date: 30 October 2009  05:45:10PM
  9. Build ID: xorg-x11-server 1.6.5-1mgc25
  10.         Before reporting problems, check http://wiki.x.org
  11.         to make sure that you have the latest version.
  12. Markers: (--) probed, (**) from config file, (==) default setting,
  13.         (++) from command line, (!!) notice, (II) informational,
  14.         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  15. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  8 15:43:23 2009
  16. (==) Using config file: "/etc/X11/xorg.conf"
  17. (EE) Failed to load module "freetype" (module does not exist, 0)
  18. (EE) Failed to load module "xtrap" (module does not exist, 0)
  19. Setting master

  20. waiting for X server to begin accepting connections .
  21. ..
  22. ..
  23. ..
  24. ..
  25. ..
  26. ..
复制代码
回复

使用道具 举报

发表于 2009-12-9 00:03:44 | 显示全部楼层
又是键盘无反应,这个X真是麻烦,如果出错怎么也要有个返回的可能。X不是啥好东西。
回复

使用道具 举报

发表于 2009-12-9 00:05:13 | 显示全部楼层
/var/log/Xorg.0.log 把这个文件也贴贴看看呗
回复

使用道具 举报

发表于 2009-12-9 00:27:10 | 显示全部楼层
现在新的X服务,如果黑屏就只能手动关机了,怀念以前可以快捷键重启X的日子。
我板载的是ATI的显卡,安了一块N卡,从来就没试过ATI。

[ 本帖最后由 haulm 于 2009-12-9 00:29 编辑 ]
回复

使用道具 举报

 楼主| 发表于 2009-12-9 08:07:48 | 显示全部楼层
Xorg.0.log

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注册

×
回复

使用道具 举报

发表于 2009-12-9 09:27:16 | 显示全部楼层
这个里面找不到有用的信息,x的无敌三键是可以启用,不过好像和hal的规则有关,目前还不知道怎么弄,网上提供的办法在magic上都不好使。
回复

使用道具 举报

 楼主| 发表于 2009-12-11 00:30:22 | 显示全部楼层
内核降级到 2.6.30.10-3mgc,升级系统后,intel 驱动可以进入,分辨率正常了,但是速度巨慢。。。。比 vesa 还慢好多。。。窗口移动反应慢。。。

但是右下角的屏幕亮度控制可以调节了~
回复

使用道具 举报

whistler_wmz 该用户已被删除
发表于 2009-12-11 00:35:53 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
回复

使用道具 举报

 楼主| 发表于 2009-12-11 00:40:27 | 显示全部楼层
  1. xauth:  creating new authority file /home/nihui/.serverauth.5419

  2. X.Org X Server 1.6.5
  3. Release Date: 2009-10-11
  4. X Protocol Version 11, Revision 0
  5. Build Operating System: Linux 2.6.30.10-smp i686
  6. Current Operating System: Linux MagicLinux 2.6.30.10-smp #1 SMP Wed Dec 9 00:02:03 CST 2009 i686
  7. Kernel command line: ro root=/dev/sda8 vga=791 quiet splash=silent,fadein,theme:default console=tty1 3
  8. Build Date: 10 December 2009  12:36:09PM
  9. Build ID: xorg-x11-server 1.6.5-2mgc25
  10.         Before reporting problems, check http://wiki.x.org
  11.         to make sure that you have the latest version.
  12. Markers: (--) probed, (**) from config file, (==) default setting,
  13.         (++) from command line, (!!) notice, (II) informational,
  14.         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  15. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 10 16:33:36 2009
  16. (==) Using config file: "/etc/X11/XF86Config"

  17. (EE) Failed to load module "freetype" (module does not exist, 0)
  18. (EE) Failed to load module "xtrap" (module does not exist, 0)
  19. (EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
  20. (EE) intel(0): Failed to become DRM master.
  21. (EE) intel(0): Failed to initialize kernel memory manager
  22. Setting master
  23. The XKEYBOARD keymap compiler (xkbcomp) reports:
  24. > Error:            Can't find file "evdev" for keycodes include
  25. >                   Exiting
  26. >                   Abandoning keycodes file "default"
  27. Errors from xkbcomp are not fatal to the X server
  28. (EE) Error compiling keymap (server-0)
  29. (EE) XKB: Couldn't compile keymap
  30. Mouse0 The /dev/input/event* device nodes seem to be missing
  31. (EE) xf86OpenSerial: Cannot open device /dev/input/mice
  32.         No such file or directory.
  33. (EE) Synaptics driver unable to open device
  34. (EE) PreInit failed for input device "Mouse0"
  35. The XKEYBOARD keymap compiler (xkbcomp) reports:
  36. > Error:            Can't find file "evdev" for keycodes include
  37. >                   Exiting
  38. >                   Abandoning keycodes file "default"
  39. Errors from xkbcomp are not fatal to the X server
  40. (EE) Error compiling keymap (server-0)
  41. (EE) XKB: Couldn't compile keymap
  42. The XKEYBOARD keymap compiler (xkbcomp) reports:
  43. > Error:            Can't find file "evdev" for keycodes include
  44. >                   Exiting
  45. >                   Abandoning keycodes file "default"
  46. Errors from xkbcomp are not fatal to the X server
  47. (EE) Error compiling keymap (server-0)
  48. (EE) XKB: Couldn't compile keymap
  49. AlpsPS/2 ALPS GlidePoint The /dev/input/event* device nodes seem to be missing
  50. Query no Synaptics: 000000
  51. (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
  52. (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
  53. (EE) config/hal: NewInputDeviceRequest failed (8)
  54. The XKEYBOARD keymap compiler (xkbcomp) reports:
  55. > Error:            Can't find file "evdev" for keycodes include
  56. >                   Exiting
  57. >                   Abandoning keycodes file "default"
  58. Errors from xkbcomp are not fatal to the X server
  59. (EE) Error compiling keymap (server-0)
  60. (EE) XKB: Couldn't compile keymap
  61. The XKEYBOARD keymap compiler (xkbcomp) reports:
  62. > Error:            Can't find file "evdev" for keycodes include
  63. >                   Exiting
  64. >                   Abandoning keycodes file "default"
  65. Errors from xkbcomp are not fatal to the X server
  66. (EE) Error compiling keymap (server-0)
  67. (EE) XKB: Couldn't compile keymap
  68. The XKEYBOARD keymap compiler (xkbcomp) reports:
  69. > Error:            Can't find file "evdev" for keycodes include
  70. >                   Exiting
  71. >                   Abandoning keycodes file "default"
  72. Errors from xkbcomp are not fatal to the X server
  73. (EE) Error compiling keymap (server-0)
  74. (EE) XKB: Couldn't compile keymap
  75. The XKEYBOARD keymap compiler (xkbcomp) reports:
  76. > Error:            Can't find file "evdev" for keycodes include
  77. >                   Exiting
  78. >                   Abandoning keycodes file "default"
  79. Errors from xkbcomp are not fatal to the X server
  80. (EE) Error compiling keymap (server-0)
  81. (EE) XKB: Couldn't compile keymap
  82. The XKEYBOARD keymap compiler (xkbcomp) reports:
  83. > Error:            Can't find file "evdev" for keycodes include
  84. >                   Exiting
  85. >                   Abandoning keycodes file "default"
  86. Errors from xkbcomp are not fatal to the X server
  87. (EE) Error compiling keymap (server-0)
  88. (EE) XKB: Couldn't compile keymap
  89. /etc/X11/Xresources:10:10: warning: missing terminating ' character
  90. localuser:nihui being added to access control list
  91. The XKEYBOARD keymap compiler (xkbcomp) reports:
  92. > Error:            Can't find file "unknown" for geometry include
  93. >                   Exiting
  94. >                   Abandoning geometry file "default"
  95. Errors from xkbcomp are not fatal to the X server
  96. (EE) Error compiling keymap (server-0)
  97. (EE) XKB: Couldn't compile keymap
  98. X Error of failed request:  BadValue (integer parameter out of range for operation)
  99.   Major opcode of failed request:  141 (XTEST)
  100.   Minor opcode of failed request:  2 (X_XTestFakeInput)
  101.   Value in failed request:  0x0
  102.   Serial number of failed request:  16
  103.   Current serial number in output stream:  19
  104. startkde: Starting up...
复制代码
回复

使用道具 举报

 楼主| 发表于 2009-12-11 12:45:24 | 显示全部楼层
回复

使用道具 举报

发表于 2009-12-11 15:35:49 | 显示全部楼层
原帖由 nihui 于 2009-12-11 00:30 发表
内核降级到 2.6.30.10-3mgc,升级系统后,intel 驱动可以进入,分辨率正常了,但是速度巨慢。。。。比 vesa 还慢好多。。。窗口移动反应慢。。。

但是右下角的屏幕亮度控制可以调节了~ ...

慢就是3d驱动没起来吧,libdrm/mesa?
回复

使用道具 举报

发表于 2009-12-11 16:53:26 | 显示全部楼层
内核的drm模块,i915加载了没有?
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-23 02:37 , Processed in 0.104003 second(s), 17 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表