run u-boot on s3c6410

Zourva

Hi all, I wanna run u-boot on s3c6410 simulated by skyeye. I use the following conf, start, and run.The command line shows
In start_all_thread, the thread 1 is set to running
In start_all_thread, the thread 2 is set to running
and then nothing happened, no uboot menu options printed.

The memory address partition scheme is digested from the user manual of s3c6410.Have I got something wrong about the conf file?  

And , by the way, had anyone ever tried configuring scratchpad memory(or, say Tightly Coupled Memory) using skyeye? If any, would you share your methods?

Thanks very much and any suggestion will be appreciated.

Here's some info I think may be helpful.
/// info printed when type start command
Loaded RAM   ./u-boot.bin
1 core is initialized.
SKYEYE: use arm11jzf-s mmu ops
SKYEYE: use arm11jzf-s mmu ops
Can not get correct kernel filename!Maybe your skyeye.conf have something wrong!
In SIM_start, Set PC to the address 0x50000000

/// conf file

1. 
   
2. arch:arm
   
3. cpu: arm11
   
4. mach: s3c6410x
   
5. 
   
6. # physical memory
   
7. # 128M Booting Device Region by XOM settings
   
8. mem_bank: map=M, type=RW, addr=0x00000000, size=0x08000000
   
9. # 64M internal ROM
   
10. mem_bank: map=M, type=RW, addr=0x08000000, size=0x04000000
    
11. # 64M Boot Loader
    
12. mem_bank: map=M, type=RW, addr=0x0c000000, size=0x04000000, file=./u-boot.bin, boot=yes
    
13. 
    
14. # SROMC bank0-bank5
    
15. #mem_bank: map=M, type=RW, addr=0x10000000, size=0x08000000
    
16. #mem_bank: map=M, type=RW, addr=0x18000000, size=0x08000000
    
17. #mem_bank: map=M, type=RW, addr=0x20000000, size=0x08000000
    
18. #mem_bank: map=M, type=RW, addr=0x28000000, size=0x08000000
    
19. #mem_bank: map=M, type=RW, addr=0x30000000, size=0x08000000
    
20. #mem_bank: map=M, type=RW, addr=0x38000000, size=0x08000000
    
21. # Reserved
    
22. #mem_bank: map=M, type=RW, addr=0x40000000, size=0x08000000
    
23. #mem_bank: map=M, type=RW, addr=0x48000000, size=0x10000000
    
24. # DRAM 512M
    
25. mem_bank: map=M, type=RW, addr=0x50000000, size=0x10000000
    
26. mem_bank: map=M, type=RW, addr=0x60000000, size=0x10000000
    
27. 
    
28. # all peripherals I/O mapping area
    
29. mem_bank: map=I, type=RW, addr=0x70000000, size=0x10000000
    
30. 
    
31. mem_bank: map=I, type=RW, addr=0x80000000, size=0x10000000
    
32. 
    
33. uart:mod = term
    
34. load_addr:base=0x50000000, mask=0xFFFFFF
    
35. #-l0x50000000,0xffffff
    

复制代码

xq2537

Hello,ZourvaZourva
       I also want to run u-boot on s3c6410,maybe we can do it together.Can you tell me your progress at present?

Thanks,
XiaoQiao

duzhig

我正在at91sam9263平台上仿真u-boot目前还不能运行，u-boot好多地方有flash操作，
我正在测试加上flash选项，我的u-boot版本是2011.03，有进展及时联系谢谢！