help me !!!!

xuzubo · 发表于 2003-4-23 01:49:03

what partiton and directory on that partiton hold the cd (iso9660)images for red hat linux?if u don't see the disk u r using listed here,press F2 to configure additional devices.
/dev/hdb1
/dev/hdb5
/dev/hdb6
/dev/hdb7
diretory holding images:---------------------

ok back
我到這里了，我該怎麽辦呢？我的安裝文件5CD分別放在E：\LIN LIN1 LIN2 LIN3 LIN4里面。可以嗎？

Dragonfly · 发表于 2003-4-23 02:04:50

u at least tell u what are u doing.

xuzubo · 发表于 2003-4-23 02:21:10

是這樣，我下載了REDHATLINUX8。0版本，5CD的。文件解壓後CD1放在E：\LIN CD2放在LIN2。CD3放在LIN3目錄下。我現在安裝的時候。出現了上面的掉示（找安装Linux光盘iso的路径）但我不知道在diretory holding images:----------這里-----------
我想知道這路徑該怎麽填寫，請指教。謝謝

Dragonfly · 发表于 2003-4-23 02:52:58

1) what u mean '文件解壓後'? u download which type of file? iso? u uncompress to which type of file?
2) u use which file system, fat32 or ntfs for e?
3) can u put all 5 iso files under e:/, enter '/' in directory hold images, and choose /dev/hda5 6, 7 one by one?

xuzubo · 发表于 2003-4-23 03:27:38

1，我下載的文件：shrike-i386-disc1.iso。我用WINZIP工具解壓放在E：\LIN目錄下。DISK2。ISO放在LIN1，DISK3 放在LIN2。。。。。
2，我在硬盤剛被我DM，C區8G。C，D ，E，F格式都為FAT32
3，我剛剛在把硬盤挂在另台機器上，在WINDOWS里面SEARCH LIN目錄下的BOOT。IMG，路徑為I：\LIN\IMAGES\BOOT.IMG 我在
dev/hdb1
/dev/hdb5
/dev/hdb6
/dev/hdb7
diretory holding images:E：\LIN\IMAGES\BOOT.IMG *輸入*
提示：error failed to read directpry /tmp /dh/hd image/e:\lin\images\boot.img:no such file or directory.

xuzubo · 发表于 2003-4-23 04:20:08

我是一個新手，今天第一次親密的接觸LINUX，感謝cheungming給于我的幫助，謝謝！我先去小睡一會了，醒來再試。祝各位開心。

Dragonfly · 发表于 2003-4-23 04:46:12

[quote:76b0aa5137="xuzubo"]1，我下載的文件：shrike-i386-disc1.iso。我用WINZIP工具解壓放在E：\LIN目錄下。DISK2。ISO放在LIN1，DISK3 放在LIN2。。。。。
2，我在硬盤剛被我DM，C區8G。C，D ，E，F格式都為FAT32
3，我剛剛在把硬盤挂在另台機器上，在WINDOWS里面SEARCH LIN目錄下的BOOT。IMG，路徑為I：\LIN\IMAGES\BOOT.IMG 我在
dev/hdb1
/dev/hdb5
/dev/hdb6
/dev/hdb7
diretory holding images:E：\LIN\IMAGES\BOOT.IMG *輸入*
提示：error failed to read directpry /tmp /dh/hd image/e:\lin\images\boot.img:no such file or directory.[/quote]

u need not uncompress the iso file u downlaoded. try this. put all iso files under e:/, enter '/' in directory hold images, and choose /dev/hda5 6, 7 one by one. should be ok. btw, do u reserve some space for linux?

Dragonfly · 发表于 2003-4-23 04:55:27

btw, if u are new comer to linux, u had better burn iso to cd and install from cd rom. save u much learning time and pain.

xuzubo · 发表于 2003-4-23 09:09:22

我等會去買linux光盤.

xuzubo · 发表于 2003-4-23 09:34:32

我有硬盤C驅有8G，格式為FAT32。C區空的，什麽也沒有。我想把LINUX裝C區，還要重新為LINUX分配空間嗎？如果要，我該怎麽辦？

Dragonfly · 发表于 2003-4-23 10:06:09

[quote:f1ffe33106="xuzubo"]我有硬盤C驅有8G，格式為FAT32。C區空的，什麽也沒有。我想把LINUX裝C區，還要重新為LINUX分配空間嗎？如果要，我該怎麽辦？[/quote]
u need a swap partition and a root partition at least. so when u install, delete that c and creat two new ones.

xuzubo · 发表于 2003-4-23 17:36:39

我应该怎么caeat a swap partition and a root partition ?thanks.

mozilla · 发表于 2003-4-23 21:15:15

用pqmagic

Dragonfly · 发表于 2003-4-23 22:11:30

do it when u see the fdisk interface.

		自动登录	找回密码
密码			注册