仍然没有图像,没有界面

haryyunfei

我的仍然没有图像,没有界面
MPlayer 0.92-3.2.2  (C) 2000-2003 MPlayer Team
CPU: Intel Celeron 2/Pentium III Tualatin (Family: 6, Stepping: 1)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Available video output drivers:
        fbdev   Framebuffer Device
        null    Null video output
        pgm     PGM file
        md5     MD5 sum
        mpegpes Mpeg-PES file
        yuv4mpeg        yuv4mpeg output for mjpegtools (to "stream.yuv")
        vesa    VESA VBE 2.0 video output

[root@localhost MPlayer-0.92]# mplayer /mnt/win_c/qvlh07.avi
MPlayer 0.92-3.2.2  (C) 2000-2003 MPlayer Team
CPU: Intel Celeron 2/Pentium III Tualatin (Family: 6, Stepping: 1)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: 50 audio & 136 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf: 没有那个文件或目录
Can't open input config file /usr/local/etc/mplayer/input.conf: 没有那个文件或目录
Falling back on default (hardcoded) input config

Playing /mnt/win_c/qvlh07.avi
AVI file format detected.
VIDEO:  [DIV3]  352x240  24bpp  29.97 fps  304.3 kbps (37.1 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 16000 Hz, 2 ch, 16 bit (0x10), ratio: 4000->64000 (32.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
fbdev: Can't open /dev/fb0: 没有那个设备
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
Checking audio filter chain for 16000Hz/2ch/16bit -> 16000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 16000 hz, little endian signed int
AF_pre: 16000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 16000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [null] 352x240 => 352x240 Planar YV12
A:   3.8 V:   3.8 A-V: -0.000 ct:  0.001  116/116  11%  0%  1.7% 2 0 0%

Exiting... (End of file)
[root@localhost MPlayer-0.92]#

Discman

搜索

fengyi25

CPU: Intel Celeron 2/Pentium III Tualatin (Family: 6, Stepping: 1)

我的CPU和你的一样，你是用什么编译的？gmake或make?
0.95rc 特别版装一下试试看？
我用它编译：./configure --enable-gui
gmake
gmake install 。完成后，试一下gmplayer，提示少了font和Skin。在解压后的包里把它们
拷过去就可以用界面了。

lawrence715

我就是用了公社里的那个 0.95 rc   
编译的时候 我参照了一个帖子里的  ./configure --enable-gui --language=zh
有图形界面了

Veldrin

是0.9 rc5，不要搞错了。

lawrence715

呵呵  是啊  !