QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 567|回复: 9

小弟不才,希望哪位大哥教一下在linux下怎么装VMware

[复制链接]
发表于 2003-10-10 11:48:28 | 显示全部楼层 |阅读模式
公社下的
VMware-workstation-4.0.5-6030.tar
多谢了!!!!
发表于 2003-10-10 12:02:12 | 显示全部楼层
解压后,进入vmware-distrib目录,./vmware-install
回复

使用道具 举报

 楼主| 发表于 2003-10-10 22:47:41 | 显示全部楼层
这个都好了
问题是!!
运行配置工具!!!
[root@loading bin]# ./vmware-config.pl
Making sure VMware Workstation's services are stopped.

Stopping VMware services:
   Virtual machine monitor                                 [  确定  ]

Trying to find a suitable vmmon module for your running kernel.

None of VMware Workstation's pre-built vmmon modules is suitable for your
running kernel.  Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes] y

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

As of September 2002, gcc version 3 and later is not yet a supported compiler by
the Linux kernel development team. Have a look at Documentation/Changes in your
kernel source directory to get the correct compiler installed. Do you want to go
with compiler "/usr/bin/gcc" version "3.2.2"? [no] y

What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include]

The directory of kernel headers (version 2.4.20-8custom) does not match your
running kernel (version 2.4.20-.  Even if the module were to compile
successfully, it would not load into the running kernel.

What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include]

我把/usr/src 下所有目录都试了,都是一样
The directory of kernel headers (version 2.4.20-8custom) does not match your
running kernel (version 2.4.20-.
怎么回事啊?我编译了一次内核!可是我进的是没编译的啊!我进的是2.4.20-8啊!?
回复

使用道具 举报

发表于 2003-10-11 02:30:50 | 显示全部楼层
你现在的头文件是编译后的吧?
回复

使用道具 举报

 楼主| 发表于 2003-10-11 15:11:29 | 显示全部楼层
我很菜
那怎么办啊??
怎么改头文件啊?
多谢了!
回复

使用道具 举报

 楼主| 发表于 2003-10-12 15:41:38 | 显示全部楼层
[quote:5580f5686f="w1ang"]你现在的头文件是编译后的吧?[/quote]

w1ang大哥
到底改怎么做啊!?
多谢了!!!
回复

使用道具 举报

发表于 2003-10-12 17:26:51 | 显示全部楼层
为什么不进编译后的内核安装?没看见提示吗?即使编译成功模块,它也不会被加载到正在运行的内核。我遇到过,就算修改了头文件,它也不认。要不到vmware的技术支持网站看看。
回复

使用道具 举报

发表于 2003-10-12 17:48:47 | 显示全部楼层
我查阅了有关资料,看你的内核是否满足以下两条:
1、实时时钟功能必须被编译进内核;
2、要求并口PC风格硬件选项(CONFIG_PARPORT_PC)被build并作为内核模块(也就是说,当编译内核时它必须设置为m)。
回复

使用道具 举报

 楼主| 发表于 2003-10-13 12:49:29 | 显示全部楼层
编译后的内核 已经被我删了!!!
那怎么办啊?
还得重新编译一次?
回复

使用道具 举报

 楼主| 发表于 2003-10-14 17:22:56 | 显示全部楼层
再问以下,怎么改头文件啊?
多谢了!
能多学一点,就多学一点!
呵呵~
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-10-1 03:20 , Processed in 0.081828 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表