FTP安装RH linux7.2时遇到问题.

1111

我的旧笔记本
P166  
24M RAM
1M Video RAM
814MB Hardisk

eth0 3com598
eth1 Fujitsu JV198

想做为家用的网络服务器,由于硬盘太小,外置并口光驱总能被不正确识别,又不准备安装太高版本的LINUX,因此决定安装 RH Linux7.2, FTP方式.

用原厂的 fujitsu 网卡下载速度极慢 平均在 4~1.0 Kbps ,通常不能正确下载netstg1.img就断线.
用3com下载,6秒即完成,从做为FTP服务器的win2000pro上看,也是完全下载完了6.9M...

可每次均出现如下问题:
Running anaconda - please wait...
Traceback (innermost last):
  File "/usr/bin/anaconda", line 63,in ?
    import signal, traceback,string,isys,iutil,time
  File "/usr/lib/anaconda/isys.py", line 3, in ?
    import _isys
ImportError: /lin/libresolv.so.2: cannot read file data: Is a directory
Install exited abnormally
sending termination signals...done
sending kill signals...done
unmounting filesystems...
/mnt/runtime done
disabling /dev/loop0
/proc done
/dev/pts done
/tmp/ramfs done
you may safely reboot your system

[Alt+F2]
#

[Alt+F3]
* copying file to fd 10
* wrote 4717853 bytes
* transferring ftp://192.168.0.2//./RedHat/base/netstg1.img to a fd
* copied 6938624 bytes to /tmp/ramfs/netstg1.img
* loopfd is 12
* got url ftp://test:%74%65%73%[email protected]//.
* getting ready to spawn shell now
* probing buses
* finished bus probing
* looking for video cards requiring agpgart module
* found video card controller unknown
* going to insmod raid0.o (path is NULL)
* going to insmod raid1.o (path is NULL)
* going to insmod xor.o (path is NULL)
* going to insmod raid5.o  (path is NULL)
* going to insmod fat.o  (path is NULL)
* going to insmod msdos.o  (path is NULL)
* going to insmod vfat.o  (path is NULL)
* going to insmod jbd.o  (path is NULL)
* going to insmod ext3.o  (path is NULL)
* going to insmod reserfs.o  (path is NULL)
* looking for USB mouse...

[Alt+F4]
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<6>attempt to access beyond end of device
<6>01:01: rw0, want=5103, limit
<4>Error -3 while decompressing!
<4>c026ba84(-1407740511)->c15b3000(4096)
=====================================
不知道是不是因为显卡分辨率低,导致的错误.
但如果用软盘启动,text安装,3com和fujitsu网卡均不能正确识别(也用了原盘的netdrv.img)

不知道是不是此原因,望解.

我的显卡支持到 800X600 256color  or 640X480 16bit.