mplayer1.0pre运行问题

djklhm

我的MPLAYER运行一闪而过。
我在GNOME TERMINAL下运行gmplayer有如下报告，请高手指点

[root@going GTK2]# gmplayer
MPlayer 1.0pre1-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Celeron A Mendocino/Pentium II Dixon (Family: 6, Stepping: 5)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 SSE

Reading config file /etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没
有那个文件或目录
Reading /etc/mplayer/codecs.conf: 60 audio & 156 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (7649 chars)
使用Linux的硬件RTC计时(1024Hz)
Can't open input config file /root/.mplayer/input.conf: 没有那个文件或目录
Input config file /etc/mplayer/input.conf parsed: 52 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : 没有那个设备
Can't init input joystick
起动红外遥控支持...
mplayer: could not connect to socket
mplayer: 没有那个文件或目录
红外遥控支持起动失败!
你将无法使用你的遥控器
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/share/mplayer/Skin'
[root@going GTK2]#

frenewang

将你的mplayer目录下的mplayer配置文件cp到/root/.mplayer下或者是/usr/share/mplayer下!
具体有codecs.conf   input.conf
建议看看本版的mplayer问题集里面的mplayer安装介绍.

djklhm

谢谢，我回去试一试

djklhm

不行，问题如下：

[root@going root]# gmplayer
MPlayer 1.0pre1-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Celeron A Mendocino/Pentium II Dixon (Family: 6, Stepping: 5)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 SSE

Reading config file /etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Option RIGHT needs a parameter at line 10
Option LEFT needs a parameter at line 11
Option DOWN needs a parameter at line 12
Option UP needs a parameter at line 13
Option PGUP needs a parameter at line 14
Option PGDWN needs a parameter at line 15
Option - needs a parameter at line 16
Option + needs a parameter at line 17
Option q needs a parameter at line 18
Option ESC needs a parameter at line 19
Option ENTER needs a parameter at line 20
Option p needs a parameter at line 21
Option SPACE needs a parameter at line 22
Option HOME needs a parameter at line 23
Option END needs a parameter at line 24
Option > needs a parameter at line 25
too many errors

djklhm

为何无人理

iceco

你的conf文件好像有错误，看llc的安装手册装一下