各位高手来这帮我分析一下是什么原因造成安装LINUX失败??

jiaxin

下载好三个ISO文件后,接着MD5校验和也正确,然后我就重启进入DOS后运行autoboot.bat,但是无法安装!!!
以下是屏幕出现的信息:
ide1 at 0x170-0x177,0x376 on irq 15
hda:host protected area=>1
hda:80043264 sectors <40982 MB> w/2048kiB Cache, chs=4982/255/63, UDMA(100)
hdc:ATAPI 40x DVD-ROM drive, 512KB Cache
Uniform CD-ROM drive Revision:3.12
ied-floppy driver 0.99.newide
Partition check:
hda:hda1 hda2 <hda5 hda6 hda7 hda8> hda3
ide-floppy driver 0.99.newide
usb.c:registered new driver usbdevfs
usb.c:registered new driver hub
ehci-hcd 00.1d.7: PCI device 8086:24cd
ehci-hcd 00.1d.7: irq 11,pci mem d000d000
usb.c:new USB bus registered, assigned bus number 1
ehci-hcd 00:1d.7: enabled 64bit PCI DMA
PCI:00:1d.7 PCI cache line size set incorreetly(o bytes) by BIOS/FW.
PCI:00:1d.7 PCI cache line size corrected to 16.
ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00,driver 2003-Jan-22
hub.c:USB hub found
hub.c:6 Ports detected
usb-uhci.c:$Revision: 1.275 $ time 17:33:52 Mar 13 2003
usb-uhci.c:High bandwidth mode enabled
usb-uhci.c:USB UHCI at I/O 0xb800, IRQ11
usb-uhci.c:Detected 2 ports
__(注:光标在这里一闪一闪死到这里了)
请各位帮我分析一下这是怎么回事???