Redhat Enterprise 3下液晶显示器无法进入X

reynold

安装了Redhat Enterprise 3，但是startx后屏幕就变成一条条的花屏了，redhat－config－xfree86也是同样情况，修改xfree86config中的水平和垂直刷新率也无用啊
使用startx和redhat－config－xfree86后，可以看到短暂的信息：
idname:0
vendorname:0
HorizSync:0
VertRefresh:0
然后就变成条条的花屏了，郁闷啊

我的显示器是EIZO L367，显卡是5200，使用数字DVI接口的，说明书上写了，水平：31－49，垂直：59－61（数字输入）
我这样设置了xfree86config也没有用啊……

whiz

你改用一般的模拟信号接口，试试，我用的就是Enterprise 3，液晶显示正常

runking

我也遇到过类似的问题。
但这并不是显示器的问题，而是显卡与对应的驱动的问题。
开始用的是NV5200，但进不了图形界面，后改用GF2 MX400就没有这种问题了。

yangtou

关键是装好显卡驱动,你装上nvidia的驱动了吗?

runking

驱动当然是安装上啦。
这个方面你最好去GUOGONG的网站去下载AS3的对应内核修改程序并安装，然后才能顺利的安装眯卡和其他的硬件！
http://www.ehuilong.com/gugong/myweb

reynold

我下載了驅動，正確安裝了，但是還是沒有用，原來使用的是CRT沒有任何問題
我的XF86Config:
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unprobed Monitor" --->這兒就算改成LCD Panel 1024x768也不行
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce FX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

reynold

人呢，快來幫我一把吧