Mplayer播放问题

路漫漫

我在命令行下播放用 vesa 参数时全屏播放，效果很差

于是用fddev参数。可是无法播放，出现问题如下，请高手看看。谢谢

我用mplayer -vo fbdev2 ×××××.avi
出现一下结果：我真不知怎么办，指点一下。谢谢！

Falling back on default (hardcoded) input config Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : 蒋沼巰,攼婑, Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: 蒋沼巰,斞幀懑晭ǜ?
Failed to open LIRC support.
You will not be able to use your remote control.
Playing ultimate.avi
AVI file format detected.
VIDEO: [] 320x240 32bpp 12.000 fps 29491.2 kbp
Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 176400->176400 (1411.2 kbit) Selected audio codec: [pcm] afm:pcm (Uncompressed PCM)
fbdev2] Can't open /dev/fb0: 蒋沼巰,攼婑,
Error opening/initializing the selected video_out (-vo) device. Exiting... (End of file)

路漫漫

怎么没有人回？

isun

还没找到
[code:1]Can't open /dev/fb0[/code:1]
你用mplayer -vo help看看你有什么灵vo可用，你用什么安装的mplayer，自己编译的吗？
[code:1]$ mplayer -vo help
MPlayer 1.0pre3try2-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Celeron 2/Pentium III Tualatin 1173 MHz (Family: 6, Stepping: 1)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf
Reading config file /home/ii/.mplayer/config
Available video output drivers:
        xv      X11/Xv
        x11     X11 ( XImage/Shm )
        xover   General X11 driver for overlay capable vo's
        gl      X11 (OpenGL)
        gl2     X11 (OpenGL) - multiple textures version
        dga     DGA ( Direct Graphic Access V2.0 )
        fbdev   Framebuffer Device
        fbdev2  Framebuffer Device
        aa      AAlib
        png     PNG file
        jpeg    JPEG file
        gif89a  animated GIF output
        null    Null video output
        pgm     PGM file
        md5     MD5 sum
        mpegpes Mpeg-PES file
        yuv4mpeg        yuv4mpeg output for mjpegtools (to "stream.yuv")
        vesa    VESA VBE 2.0 video output
        xvidix  X11 (VIDIX)
        cvidix  VIDIX
        tga     Targa output

$ [/code:1]

路漫漫

我查一下，我的显示为：

CPU: Intel Pentium 4/Xeon/Celeron Northwood 2022 MHz (Family: 8, Stepping: 7)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Reading config file /etc/mplayer/mplayer.confReading config file /root/.mplayer/config
MPlayer 1.0pre2-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Pentium 4/Xeon/Celeron Northwood 2022 MHz (Family: 8, Stepping: 7)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Reading config file /etc/mplayer/mplayer.confReading config file /root/.mplayer/config
Available video output drivers:
        xv        X11/Xv
        x11        X11 ( XImage/Shm )
        xover        General X11 driver for overlay capable vo's
        gl        X11 (OpenGL)
        gl2        X11 (OpenGL) - multiple textures version
        dga        DGA ( Direct Graphic Access V2.0 )
        sdl        SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
        fbdev        Framebuffer Device
        fbdev2        Framebuffer Device
        aa        AAlib
        png        PNG file
        jpeg        JPEG file
        gif89a        animated GIF output
        null        Null video output
        pgm        PGM file
        md5        MD5 sum
        mpegpes        Mpeg-PES file
        yuv4mpeg        yuv4mpeg output for mjpegtools (to "stream.yuv")
        vesa        VESA VBE 2.0 video output
        xvidix        X11 (VIDIX)
        cvidix        VIDIX
        tga        Targa output


我是rpm 装的(用 apt-rpm) ,我只要它在命令行下能小一些，不全屏。怎么办？


谢谢！