那位高手来看看我的mplayer为什么不能进入图形界面

ylsba

该安装的我都安装了，还出现下面的错误：
MPlayer 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Duron Spitfire 915.0 MHz (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 3DNow 3DNowEx

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /home/qxy/.mplayer/config
[cfg] read config file: /home/qxy/.mplayer/gui.conf
Reading config file /home/qxy/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /home/qxy/.mplayer/codecs.conf: Can't open '/home/qxy/.mplayer/codecs.conf': 没有那个文件或
目录
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': 没有那
个文件或目录
使用内建默认的codecs.conf.
font: can't open file: /home/qxy/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Linux RTC init error in ioctl (rtc_irqp_set 1024): 权限不够
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using usleep() timing
Can't open input config file /home/qxy/.mplayer/input.conf: 没有那个文件或目录
Can't open input config file /usr/local/etc/mplayer/input.conf: 没有那个文件或目录
Falling back on default (hardcoded) input config
起动红外遥控支持...
mplayer: could not connect to socket
mplayer: 没有那个文件或目录
红外遥控支持起动失败!
你将无法使用你的遥控器
SKIN dir 1: '/home/qxy/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
[skin] file ( /usr/local/share/mplayer/Skin/default/skin ) not found.
找不到Skin( default ).

清高手帮我找找原因

foooof

要不自己建个文件夹，下一个装上

fwen

http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=64327

ylsba

我就是安装下面的那个帖子一步步的装的,没有任何遗漏.