急！ML1.2beta3进不了X

EEfree · 发表于 2004-9-30 23:27:07

在console下输入startx也没用，说找不到screen
我用的是笔记本compaq EvoN800v。
Beta2正常。
请问怎样解决？非常急！
谢谢！

KanKer · 发表于 2004-9-30 23:30:23

修改/etc/X11/XF86Config的screen节如下试试：
Section "Screen"
      Identifier    "Screen0"
      Device       "Videocard0"
      Monitor       "Monitor0"
      DefaultDepth 16
      SubSection "Display24"
            Depth    24
            Modes "1024x768" "800x600" "640x480"
      EndSubSection
      SubSection    "Display16"
            Depth 16
            Modes "1024x768" "800x600" "640x480"
      EndSubSection
EndSection

EEfree · 发表于 2004-9-30 23:57:26

还是不行...
把log和配置都贴给您看吧。

log文件XFree86.0.log为：

XFree86 Version 4.4.0 (Magic Linux release: 4.4.0-6mgc)
Release Date: 30 March 2004
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.8.1 i686 [ELF]
Current Operating System: Linux compaq 2.6.8.1 #3 Fri Sep 17 18:21:40 CST 2004 i686
Build Date: 05 September 2004
Changelog Date: 05 April 2004
Build Host: zrd

Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.8.1 (root@MagicLinux) (gcc version 3.3.3 20040216 (Magic Linux 3.3.3-2)) #3 Fri Sep 17 18:21:40 CST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 30 23:45:12 2004
(==) Using config file: "/etc/X11/XF86Config"
Data incomplete in file /etc/X11/XF86Config
Undefined InputDevice "DevInputMice" referenced by ServerLayout "Default Layout".
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

=================================================

XF86Config的内容为：
# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
      Identifier    "Default Layout"
      Screen    0 "Screen0" 0 0
      InputDevice    "Mouse0" "CorePointer"
      InputDevice    "Keyboard0" "CoreKeyboard"
      InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
      RgbPath       "/usr/X11R6/lib/X11/rgb"
      FontPath       "/usr/X11R6/lib/X11/fonts/misc:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/misc"
      FontPath       "/usr/X11R6/lib/X11/fonts/Type1"
      FontPath       "/usr/X11R6/lib/X11/fonts/Speedo"
      FontPath       "/usr/X11R6/lib/X11/fonts/cyrillic"
      FontPath       "/usr/X11R6/lib/X11/fonts/TTF"
      FontPath       "/usr/share/fonts/ttf/zh_CN"
      FontPath       "/usr/share/fonts/default/Type1"

EndSection

Section "Module"
      Load "dbe"
      Load "extmod"
      Load "fbdevhw"
      Load "glx"
      Load "record"
      Load "freetype"
      Load "type1"
EndSection

Section "InputDevice"
      Identifier    "Keyboard0"
      Driver       "keyboard"
      Option       "XkbRules" "xfree86"
      Option       "XbkModel" "pc105"
      Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
      Identifier    "Mouse0"
      Driver       "mouse"
      Option       "Protocol" "IMPS/2"
      Option       "Device" "/dev/input/mice"
      Option       "ZAxisMapping" "4 5"
      Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
      Identifier    "Monitor0"
      VendorName    "Monitor Vendor"
      ModelName    "Unknown monitor"
      HorizSync    31.5 - 37.9
      VertRefresh    50.0 - 70.0
EndSection

Section "Device"
      Identifier    "Videocard0"
      Driver       "radeon"
      VendorName    "Videocard vendor"
      BoardName    "ATI Radeon Mobility 7500"
      VideoRam       32768
EndSection

Section "Screen"
      Identifier    "Screen0"
      Device       "Videocard0"
      Monitor       "Monitor0"
      DefaultDepth 16
SubSection "Display24"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display16"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

KanKer · 发表于 2004-10-1 00:29:19

你仿照我的改一下吧，显卡和显示器用你的，其它的用我的试试：
# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
      Identifier    "Default Layout"
      Screen    0 "Screen0" 0 0
      InputDevice    "Mouse0" "CorePointer"
      InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
      RgbPath       "/usr/X11R6/lib/X11/rgb"
      FontPath       "/usr/X11R6/lib/X11/fonts/misc:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
      FontPath       "/usr/X11R6/lib/X11/fonts/misc"
      FontPath       "/usr/X11R6/lib/X11/fonts/Type1"
      FontPath       "/usr/X11R6/lib/X11/fonts/cyrillic"
      FontPath       "/usr/X11R6/lib/X11/fonts/TTF"
      FontPath       "/usr/share/fonts/default/Type1"
      FontPath       "/usr/share/fonts"
      FontPath       "/usr/share/fonts/ttf/zh_CN/"

EndSection

Section "Module"
      Load "dbe"
      Load "extmod"
      Load "fbdevhw"
      Load "glx"
#       Load "record"
      Load "xtt"
#       Load "freetype"
#       Load "type1"
#    Load "v4l"
EndSection

Section "InputDevice"
      Identifier    "Keyboard0"
      Driver       "keyboard"
      Option       "XkbRules" "xfree86"
      Option       "XbkModel" "pc105"
      Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
      Identifier    "Mouse0"
      # Modified by mouseconfig
      Driver       "mouse"
      Option       "Device"             "/dev/input/mice"
      Option       "Protocol"             "IMPS/2"
      Option       "Emulate3Buttons"    "no"
      Option       "ZAxisMapping"       "4 5"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
      Identifier    "DevInputMice"
      Driver       "mouse"
      Option       "Protocol" "PS/2"
      Option       "Device" "/dev/input/mice"
      Option       "ZAxisMapping" "4 5"
      Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
      Identifier    "Monitor0"
      VendorName    "Monitor Vendor"
      ModelName    "CTX EX700"
      HorizSync    30.0 - 85.0
      VertRefresh    50.0 - 120.0
EndSection

Section "Device"
      Identifier    "Videocard0"
      Driver       "nvidia"
      Option       "NoLogo" "1"
      VendorName    "Videocard vendor"
      BoardName    "NVIDIA GeForce 2 MX (generic)"
      VideoRam       65536
EndSection

Section "Screen"
      Identifier    "Screen0"
      Device       "Videocard0"
      Monitor       "Monitor0"
      DefaultDepth 16
      SubSection "Display24"
            Depth    24
            Modes "1024x768" "800x600" "640x480"
      EndSubSection
      SubSection    "Display16"
            Depth 16
            Modes "1024x768" "800x600" "640x480"
      EndSubSection
EndSection

EEfree · 发表于 2004-10-1 09:24:56

谢谢您的帮助，问题已经解决：
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
将这段中的InputDevice "DevInputMice" "AlwaysCore" 去掉就可以了！

		自动登录	找回密码
密码			注册