都装了四五遍了，还是进不了X！

ludascut

debian重装了四五遍，但不知道哪儿配置出错了，今不了X。希望各位大侠给看看！谢了！
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
        FontPath        "unix/:7100"                        # local font server
        # if the local font server has problems, we can fall back on these
        FontPath        "/usr/lib/X11/fonts/misc"
        FontPath        "/usr/lib/X11/fonts/cyrillic"
        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/Type1"
        FontPath        "/usr/lib/X11/fonts/Speedo"
        FontPath        "/usr/lib/X11/fonts/100dpi"
        FontPath        "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load        "GLcore"
        Load        "bitmap"
        Load        "dbe"
        Load        "ddc"
        Load        "dri"
        Load        "extmod"
        Load        "freetype"
        Load        "glx"
        Load        "int10"
        Load        "pex5"
        Load        "record"
        Load        "speedo"
        Load        "type1"
        Load        "vbe"
        Load        "xie"
EndSection

Section "InputDevice"
        Identifier        "Generic Keyboard"
        Driver                "keyboard"
        Option                "CoreKeyboard"
        Option                "XkbRules"        "xfree86"
        Option                "XkbModel"        "pc104"
        Option                "XkbLayout"        "us"
EndSection

Section "InputDevice"
        Identifier        "Configured Mouse"
        Driver                "mouse"
        Option                "CorePointer"
        Option                "Device"                "/dev/psaux"
        Option                "Protocol"                "PS/2"
        Option                "Emulate3Buttons"        "true"
        Option                "ZAxisMapping"                "4 5"
EndSection

Section "InputDevice"
        Identifier        "Generic Mouse"
        Driver                "mouse"
        Option                "SendCoreEvents"        "true"
        Option                "Device"                "/dev/input/mice"
        Option                "Protocol"                "ImPS/2"
        Option                "Emulate3Buttons"        "true"
        Option                "ZAxisMapping"                "4 5"
EndSection

Section "Device"
        Identifier        "Generic Video Card"
        Driver                "nv"
        Option                "UseFBDev"                "true"
EndSection

Section "Monitor"
        Identifier        "Generic Monitor"
        HorizSync        30-70
        VertRefresh        50-160
        Option                "DPMS"
EndSection

Section "Screen"
        Identifier        "Default Screen"
        Device                "Generic Video Card"
        Monitor                "Generic Monitor"
        DefaultDepth        24
        SubSection "Display"
                Depth                1
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                4
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                8
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                15
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                16
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                24
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier        "Default Layout"
        Screen                "Default Screen"
        InputDevice        "Generic Keyboard"
        InputDevice        "Configured Mouse"
        InputDevice        "Generic Mouse"
EndSection

Section "DRI"
        Mode        0666
EndSection

### END DEBCONF SECTION

ludascut

这里是log的最后几行！是不是显卡驱动的问题？
我的显卡是GFMX440的！
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
GeForce3 (rev 3)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

潇湘馆主

看样子是Linux认不得你的显卡,如果怕麻烦就换一个发行版,新的Debian就可以了.

linky_fan

Section "Device"
Identifier "Generic Video Card"
Driver "nv"
Option "UseFBDev" "true"
EndSection

把Option 那行注释掉试试

ludascut

^_^！不好意思先问一下！注释是在前面加＃吗？我改成了
Section "Device"
Identifier "Generic Video Card"
Driver "nv"
Option "UseFBDev" "true"
EndSection
重启X还是不行，他说
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [email protected] and patches submitted
to [email protected].  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.20-8um i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Oct  5 15:04:23 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Parse error on line 16 of section (null) in file /etc/X11/XF86Config-4
        "
" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].
谢了

潇湘馆主

变成了"找不到屏幕"了,       

linky_fan

你用的是stable也就是woody的debian吧，xfree86的版本好低啊
gf4对它来说新了点，look this

NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
GeForce3 (rev 3)

没有gf4的

XFree86 Version 4.1.0.1 / X Window System

4.1.0.1

Parse error on line 16 of section (null) in file /etc/X11/XF86Config-4

这句话说明你的/etc/X11/XF86Config-4第16行有错，好像应该是非空的。

我觉得可以话升级到sarge或是sid，对新硬件的支持好点。在你原来的基础上装个显卡驱动觉得意义不大(当然装是可以装的).

顺便还是要做做广告，有debian的问题去公社的debian gentoo lfs版

wcbgyz

哇！好多英文啊。。。乱七八糟的，眼都看花了。。。
想用Linux是不是要背好多单词啊？
装了Linux是不是还能像Win一样浏览网页啊？

neosnake

你用windows就不需要看英文吗？
装了Linux要是不能浏览网页那我怎么给你回贴的啊？