关于rh9下显示设置的问题？我的rh9的分辨率怎么上不去？

tntking

我用的是三星763mb显示器，ati9550显卡，安完后总是800x600，rh9里没有这些驱动，我就选了三星另一型号的显示器，选的ati9500显卡，1024x768的分辨率，重起后又回到800x600，rh9默认显卡，怎么回事？

fox_eagle2003

不是显示器的问题，是显卡的问题，如果你没有安装驱动，那么系统永远都是这样的。
但本人没有安装过ati的显卡，所以帮不了你。
等等我找找办法……

fox_eagle2003

http://www.ati.com/support/drivers/linux/radeon-linux.html?type=linux&prodType=graphic&prod=productsLINUXdriver&submit.x=13&submit.y=5

看看吧！

chengfan

ATI 的显卡是不是用sh 命令 运行（*.run）就可以了
是不是和安装nvidia一样？

妖狐

上面没有安装说明吗？

妖狐

Before you install

Make sure the following software is already installed on your system:
glibc version 2.2 or 2.3
XFree86 version 4.1.0, 4.2.0, or 4.3.0
Kernel source code
Kernel header (include) files
GCC compiler
Make Utility
NOTE: Kernel source code and header files must match the version of the kernel you are using. For example, Mandrake 10.0's precompiled kernel version is 2.6.3-7mdk, for which you should need kernel-source-2.6.3-7mdk RPM release.

NOTE: Your kernel may have restrictions on which compiler versions can be used. Please check your Linux documentation for more information on installing kernel source code.


Download the correct ATI driver package for the XFree86 version you have installed. If you are not sure which, you may download and run the following script to make sure:
Check.sh
Installation using RPM

For each of these steps you will have to be logged on as the root user.
cd to the directory containing the ATI Driver rpm package


Issue the following command:
rpm -Uh --force <ati_package_name>.rpm
Note any error messages that may occur while installing (see below)

Run the fglrxconfig utility to configure the driver
Answer the questions as prompted
When asked to generate an XF86Config-4 file, answer y


Restart and log into X-Windows


Run fglrxinfo to verify the driver is installed correctly
If the output reads OpenGL vendor string: ATI Technologies Inc. then your ATI drivers are installed and configured correctly.

Otherwise, if fglrxinfo indicates that MESA Indirect (software) Rendering is being used, then you may want to repeat the steps listed above, while paying careful attention to the following:
Any error messages during install (see below)
All answers given during fglrxconfig
The following messages may appear while installing the ATI Proprietary Linux Driver:
"no kernel module build environment"
"Warning: loading fglrx.o will taint the kernel"
"conflicts with file from package XFree86-Mesa-libGL-4.3.0-2"
"The QT based control panel application did not load in any version"
unresolved symbols


不是说得非常明白的吗？