USB ADSL 不能上网（内附详细信息）

yan420honggg

驱动信息
[code:1]
[root@localhost root]# cxstart.sh
>>> Inits Conexant AccessRunner <<<

time to remove modules driver
time to remove modules driver
>>> Loading firmware...
Conexant AccessRunner microcode upload program. 6/9/2003
Josep Comas <[email protected]>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00
Loading and sending /usr/sbin/cxfirm4.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
.........
ADSL line is up (Downstream 2048 Kbits/s, Upstream 512 Kbits/s)
time to remove modules driver
time to remove modules driver
checking remove modules
>>> Loading driver...
Launching driver in normal mode...
modprobe: Can't locate module speedtch
[/code:1]
adsl-setup设置一切正常
我想错也只可能是在DNS那里错，但不管是输入server还是用
ipconfig/all在XP下看到了两个DNS，都不行
adsl-start后没有反应，ping不通任何东西
下面的这个不知道是什么东西
[code:1]
[root@localhost sbin]# adsl-start
/sbin/adsl-start: line 215: 8296 Terminated $CONNECT "$@" >/dev/null 2>&1
[/code:1]
adsl-status
[code:1]
[root@localhost sbin]# adsl-status
Note: You have enabled demand-connection; adsl-status may be inaccurate.
adsl-status: Link is down -- could not find interface corresponding to
pppd pid 4844
[/code:1]
没有设置网关，确认网关为空
猫应该已经成功驱动了，但就是拨号不成功
用系统设置里的工具新建网络也都激活不了
所有可能的有用的信息我贴出来了，倒底是哪里有问题？