mplayer1.0pre3 安装问题

firescript

安装后 可用mplayer   ***.avi
正常播放
但是无法用gui界面
当时编译用了 --enable-gui

[root@ root]# gmplayer
MPlayer 1.0pre3-3.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1400 MHz (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or directory
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (7649 chars)
Failed to open /dev/rtc: Device or resource busy (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Input config file /root/.mplayer/input.conf parsed: 53 binds
起动红外遥控支持...
mplayer: could not connect to socket
mplayer: No such file or directory
红外遥控支持起动失败!
你将无法使用你的遥控器
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

这里就停住没反应了
我也在/usr/local/share/mplayer/Skin里面加了default skin  
为什么无法运行?

iceco

有没有字体配置文件？

firescript

添加了
上面不时有一句：
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (7649 chars)

iceco

你用root放的话干脆把配置文件都放在/root/.mplayer里，免得这么麻烦

any512

怎么解决啊  我的也是这个问题啊  我装了个xine只能放十几秒钟的咚咚~~~

firescript

都照做了 还是不行啊
config  input  等文件 我也从 ../etc/里面铐过去了
郁闷

firescript

发现没有gui.conf
这个文件
在安装目录中../etc/下也没有  
郁闷
找不到

谁能提供一下

iceco

gui.conf

linky_fan

拷贝界面目录到'/usr/local/share/mplayer/Skin' 里

firescript

这个已经有了
/usr/local/etc/mplayer/Skin/default

[root@...... .mplayer]# gmplayer
MPlayer 1.0pre3-3.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1400 MHz (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 61 audio & 169 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (7649 chars)
使用Linux的硬件RTC计时(1024Hz)
Input config file /root/.mplayer/input.conf parsed: 53 binds
起动红外遥控支持...
mplayer: could not connect to socket
mplayer: No such file or directory
红外遥控支持起动失败!
你将无法使用你的遥控器
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

还是无法显示gui
郁闷  

当时安装过程:
1.解压
2../configure --enable-gui --lanuage=zh_CN ----enable-freetype
3.make
4.make install
5.下载font  skin
   font : gbsn00lp24      ~/.mplayer/font/下
  skin : /default   and   /Blue    都放在~/.mplayer/Skin下
6.复制 安装文件/etc下的codecs.conf    dvb-menu.conf   
   example.conf->修改为config (其中有gui=yes)
   input.conf  menu.conf   mplayer.ico   
   到~/.mplayer/目录下  
7.以上的文件我在/usr/local/etc/mplayer/下也放了
8.缺少gui.conf  我也炸找了一个复制到~/.mplayer/下


上面使用gmplayer命令后说缺少mplayer.conf  
这个文件我也没有  谁能提供一下

从上面的结果看应该是皮肤加载不了
可是配置的没有问题
config里面skin=default

在X-windows使用mplayer ****.avi  可正常看电影就是没有gui界面

很是郁闷  大家帮忙 !!!!!!!

firescript

up 一下

iceco

严格按照llc写的mplayer安装手册来做，下载公社那个0.90rc5，里面都有你要的

樱家冢

你的mplayer文件不在可以直接运行的路径里面吧？做个连接到/usr/bin里面去。

ppxiaop

我也是同样的问题。顶一下

hj084

[quote:b98f24e509="firescript"]安装后 可用mplayer   ***.avi
正常播放
但是无法用gui界面
当时编译用了 --enable-gui

[root@ root]# gmplayer
MPlayer 1.0pre3-3.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1400 MHz (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or directory
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (7649 chars)
Failed to open /dev/rtc: Device or resource busy (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Input config file /root/.mplayer/input.conf parsed: 53 binds
起动红外遥控支持...
mplayer: could not connect to socket
mplayer: No such file or directory
红外遥控支持起动失败!
你将无法使用你的遥控器
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

这里就停住没反应了
我也在/usr/local/share/mplayer/Skin里面加了default skin  
为什么无法运行?[/quote]

我在RH9下 编译 1.0PRE3成功了，安装步骤和你一样，启动GMPLAYER，也停在了这个画面，不过我的GUI界面随后就自动出现了~~~
安装过程中，唯一多你一步的就是CP了WIN32CODECS的DLL文件。
这一个在./CONFIGURE 过程中有提示的~~~~