mplayer播放rm文件一闪而过？

blueprint

我的系统是fedora 2，mplayer好像也是较新的，但播放rm文件一闪而过，请指点一二，thanks.

12543122

在终端里用mplayer播放一次，看有什么错误提示？ 估计是缺少real codecs 如果是apt得到的mplayer，可以安装一个realplay10，然后把codecs 复制到/usr/lib/win32 就可以了。自己编译安装的mplayer可能需要重新编译……

wjping119

看是没有codecs,不支持
12543122, 把realcodecs复制到win32就可以了??不用重新编译??

12543122

fedora 2 ，apt得到的mplayer可以   :-)

blueprint

apt是什么？
下面的是用gmplayer 5.rm后得到的，帮帮忙：
MPlayer 1.0pre3-3.2.3 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1675 MHz (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
3DNow supported but disabled
3DNowExt supported but disabled
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
????????????????x86 CPU±à??: MMX MMX2 SSE

Reading config file /etc/mplayer/mplayer.conf: ?????????????ò????
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': ?????????????ò????
Reading /etc/mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (7649 chars)
????Linux??????RTC???±(1024Hz)
Can't open input config file /root/.mplayer/input.conf: ?????????????ò????
Input config file /etc/mplayer/input.conf parsed: 53 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : ?????????è±?
Can't init input joystick
?????ì???????§??...
mplayer: could not connect to socket
mplayer: ?????????????ò????
?ì???????§???????§°?!
??????·??????????????÷
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/share/mplayer/Skin'

??·? /root/5.rm.
skip_str: 12 bytes skipped
skip_str: 20 bytes skipped
======= WAVE Format =======
Format Tag: 28515 (0x6F63)
Channels: 1
Samplerate: 44100
avg byte/sec: 44137
Block align: 640
bits/sample: 16
cbSize: 18
Unknown extra header dump: [80] [0] [10] [0] [5] [0] [80] [2] [8] [0] [1] [0] [0] [2] [4] [0] [0] [2f]  
===========================
skip_str: 12 bytes skipped
skip_str: 20 bytes skipped
skip_str: 0 bytes skipped
skip_str: 16 bytes skipped
Reading index table from index chunk (79032761)
size: 20922 bytes
entries: 1493
stream_id: 0
next_header_pos: 79053683
Reading index table from index chunk (79053683)
size: 5354 bytes
entries: 381
stream_id: 1
next_header_pos: 79059037
Reading index table from index chunk (79059037)
size: 20 bytes
entries: 0
stream_id: 2
next_header_pos: 0
VIDEO:  RV30 [30202002,010A9030]  352x240  (aspect 0.00)  29.00 fps
name: 5
copyright: ?2000
==========================================================================
?ò???????????÷: [realaud] RealAudio decoder
opening shared obj '/usr/lib/win32/cook.so.6.0'
Audio codec: [5] 44 Kbps Music
Audio bitrate: 44.100 kbit/s (5513 bps)   
AUDIO: 44100 Hz, 1 ch, 16 bit (0x10), ratio: 5513->88200 (44.1 kbit)
Selected audio codec: [racook] afm:realaud (RealAudio COOK)
==========================================================================
==========================================================================
?ò???????????÷: [realvid] RealVideo decoder
opening shared obj '/usr/lib/win32/drv3.so.6.0'
Selected video codec: [rv30] vfm:realvid (Linux RealPlayer 8 RV30 decoder)
==========================================================================
Checking audio filter chain for 44100Hz/1ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 1 ch, 44100 hz, little endian signed int  
AF_pre: 44100Hz 1ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/1ch/16bit -> 44100Hz/2ch/16bit...
??????·?...
VDec: vo???????ó - 352 x 240 (???? csp: Planar I420)
VDec: using Planar I420 as output csp (no 0)
???°?í??±??? 1.47:1 - ??·??ó?????·?????°?í??±?.
VO: [xv] 352x240 => 352x240 Planar I420  
A:   0.2 V:   0.0 A-V:  0.180 ct:  0.000    1/  1   0%  0%  0.0% 0 0 0% A:   0.1 V:   0.0 A-V:  0.143 ct:  0.003    2/  2   0%  0%  0.0% 0 0 0% A:   0.2 V:   0.0 A-V:  0.118 ct:  0.007    3/  3   0%  0%  0.0% 0 0 0% A:   0.2 V:   0.1 A-V:  0.121 ct:  0.010    4/  4   0%  0%  0.0% 0 0 0% A:   0.2 V:   0.1 A-V:  0.094 ct:  0.014    5/  5   0%  0%  0.0% 0 0 0% ???í?ó

不知道为什么我原来的xterm终端下没有那么多乱码的。

bufferfly

看你上面的内容，这个有点奇怪了，你的机器好像不缺real的解码器（codec）呀！为什么不能放呢？而且实际上他已经开始播放了，不会是你的rm文件坏了吧，很有可能！

blueprint

文件没坏，我用realone放过没问题