b2还是不能自动挂载u盘

sejishikong

这个看起来像是kde在生成缩略图。等等吧。

guazi111

这样处理完以后就都可以挂载了，多谢色兄

不过b2又有一个问题丫，俺的无线网卡不能用了。俺之前说过俺那个是rt73的内置usb无线网卡，神舟的本子带的。在b1的时候用

1. 
   
2. ndiswrapper -i oem11.inf
   
3. modprobe ndiswrapper
   

复制代码

这样就可以用了，然后再用无线管理助手什么的配一下就可以。

而现在是无线网卡根本就没有按装成功

使用

1. 
   
2. [root@MagicLinux guazi111]# ndiswrapper -i oem11.inf
   
3. installing oem11 ...
   
4. [root@MagicLinux guazi111]# ndiswrapper -l
   
5. oem11 : driver installed
   
6.         device (148F:2573) present (alternate driver: rt73usb)
   
7. [root@MagicLinux guazi111]# modprobe ndiswrapper
   

复制代码

到这里都没问题。但是等到用dmesg检查的时候却不能出现“wlan0: ndiswrapper ethernet device”这种

而是

usbcore: registered ndiswrapper什么的这样，根本就不能安装成功……

到底是咋回事咧

djpj2046

下面是nihui贴给我的hal.conf
http://pastebin.com/m79f888ce
有需要的可以参考一下。

<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

  <!-- This configuration file specifies the required security policies
       for the HAL to work. -->

  <!-- Only root or user haldaemon can own the HAL service -->
  <policy user="haldaemon">
    <allow own="org.freedesktop.Hal"/>
  </policy>
  <policy user="root">
    <allow own="org.freedesktop.Hal"/>
  </policy>

  <!-- Allow anyone to invoke methods on the Manager and Device interfaces -->
  <policy context="default">
    <allow send_interface="org.freedesktop.Hal.Manager"/>
    <allow send_interface="org.freedesktop.Hal.Device"/>
    <allow receive_interface="org.freedesktop.Hal.Manager"
           receive_sender="org.freedesktop.Hal"/>
    <allow receive_interface="org.freedesktop.Hal.Device"
           receive_sender="org.freedesktop.Hal"/>

    <allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <allow send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
    <allow receive_interface="org.freedesktop.Hal.Device.SystemPowerManagement"
           receive_sender="org.freedesktop.Hal"/>
    <allow receive_interface="org.freedesktop.Hal.Device.LaptopPanel"
           receive_sender="org.freedesktop.Hal"/>
    <allow receive_interface="org.freedesktop.Hal.Device.Volume"
           receive_sender="org.freedesktop.Hal"/>
    <allow receive_interface="org.freedesktop.Hal.Device.Volume.Crypto"
           receive_sender="org.freedesktop.Hal"/>
  </policy>

  <!-- Default policy for the exported interfaces -->
  <policy context="default">
    <deny send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <deny send_interface="org.freedesktop.Hal.Device.VideoAdapterPM"/>
    <deny send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <deny send_interface="org.freedesktop.Hal.Device.Volume"/>
    <deny send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
  </policy>

  <!-- This will not work if pam_console support is not enabled -->
  <policy at_console="true">
    <allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <allow send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
  </policy>

  <!-- You can change this to a more suitable user, or make per-group -->
  <policy group="user">
    <allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_interface="org.freedesktop.Hal.Device.VideoAdapterPM"/>
    <allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <allow send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
  </policy>

</busconfig>

Jeff-cao

[quote/]原帖由 sejishikong 于 2008-5-8 13:15 发表
系统编译是utf-8？哪个系统？不是magic的话，我也不太清楚，另外，分区格式是fat32还是ntfs？ntfs用内核的还是ntfs-3g。
如果是magic，修改/usr/share/hal/fdi/policy/10osvendor/20-storage-methods.fdi中的相 ... [/quote]
老大，我现在用Mandriva 2008.1，这个文件/usr/share/hal/fdi/policy/10osvendor/20-storage-methods.fdi里ntfs里面已经设置成utf8了阿。或者应该加上ntfs-3g？

[quote/]<!-- allow these mount options for ntfs -->
      <match key="volume.fstype" string="ntfs">
        <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
          <append key="volume.mount.valid_options" type="strlist">uid=</append>
          <append key="volume.mount.valid_options" type="strlist">gid=</append>
          <append key="volume.mount.valid_options" type="strlist">umask=</append>
          <append key="volume.mount.valid_options" type="strlist">locale=</append>
          <append key="volume.mount.valid_options" type="strlist">utf8</append>
        </match>[/quote]

顺便上传mandriva的完整配置文件，我看里面包含了对主流笔记本的隐藏分区的支持。希望能对mandriva有所帮助。

[ 本帖最后由 Jeff-cao 于 2008-5-30 00:39 编辑 ]

Jeff-cao

试着添加了ntfs-3g，就复制了ntfs那一段，结果重启后直接不能挂载，原来还能挂载，只是中文乱码而已。哈哈。
Method "Mount" with signature "ssas" on interface "org.freedesktop.Hal.Device.Volume" doesn't exist

sejishikong

ntfs-3g是用fuse的，不能直接添加ntfs-3g的.