intel 的郁闷

nihui

最近新买的电脑，intel 显卡

vesa 可以进图形界面，但是分辨率真是恶心..........
更新 intel 驱动的 rpm 后，X 启动异常，黑屏，而且 ctrl+alt+fn 切换不到控制台......只好重启。。

intel 声卡可以识别，但是没有声音....

目前安装着 fedora 12，十分良好哦。
望下一个版本有所改善啦

sejishikong

太好了,终于有人有intel显卡了.
你来测试下吧,我猜测有可能的几个原因,一是内核中的intel显卡支持,主要是30的,我打算在正式版本中用2.6.30.10这个.一是xorg-server,fc12应该是1.7吧,你试试magic升级到1.7行不行,或者降到1.6.3?一是intel的驱动,用最新的,或者降回到2.8以下看看.我没有intel的显卡,这个测试太麻烦.

nihui

普通账户 startx &> log.txt
听到机器“滴”的一声然后就黑屏，按键无反应，只能按电源按钮关机重启...........

1. 
   
2. xauth:  creating new authority file /home/nihui/.serverauth.3186
   
3. 
   
4. 
   
5. X.Org X Server 1.6.5
   
6. Release Date: 2009-10-11
   
7. X Protocol Version 11, Revision 0
   
8. Build Operating System: Linux 2.6.31.5-smp i686
   
9. Current Operating System: Linux MagicLinux 2.6.31.6-smp #1 SMP Wed Nov 11 22:06:01 CST 2009 i686
   
10. Kernel command line: ro root=/dev/sda8 vga=791 quiet splash=silent,fadein,theme:default console=tty1 3
    
11. Build Date: 30 October 2009  05:45:10PM
    
12. Build ID: xorg-x11-server 1.6.5-1mgc25
    
13.         Before reporting problems, check http://wiki.x.org
    
14.         to make sure that you have the latest version.
    
15. Markers: (--) probed, (**) from config file, (==) default setting,
    
16.         (++) from command line, (!!) notice, (II) informational,
    
17.         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    
18. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  8 15:43:23 2009
    
19. (==) Using config file: "/etc/X11/xorg.conf"
    
20. (EE) Failed to load module "freetype" (module does not exist, 0)
    
21. (EE) Failed to load module "xtrap" (module does not exist, 0)
    
22. Setting master
    
23. 
    
24. waiting for X server to begin accepting connections .
    
25. ..
    
26. ..
    
27. ..
    
28. ..
    
29. ..
    
30. ..
    

复制代码

zy_sunshine

又是键盘无反应，这个X真是麻烦，如果出错怎么也要有个返回的可能。X不是啥好东西。

zy_sunshine

/var/log/Xorg.0.log 把这个文件也贴贴看看呗

haulm

现在新的X服务，如果黑屏就只能手动关机了，怀念以前可以快捷键重启X的日子。
我板载的是ATI的显卡，安了一块N卡，从来就没试过ATI。

[ 本帖最后由 haulm 于 2009-12-9 00:29 编辑 ]

nihui

Xorg.0.log

sejishikong

这个里面找不到有用的信息，x的无敌三键是可以启用，不过好像和hal的规则有关，目前还不知道怎么弄，网上提供的办法在magic上都不好使。

nihui

内核降级到 2.6.30.10-3mgc，升级系统后，intel 驱动可以进入，分辨率正常了，但是速度巨慢。。。。比 vesa 还慢好多。。。窗口移动反应慢。。。

但是右下角的屏幕亮度控制可以调节了~

whistler_wmz

记得我在 intel 显卡的机器上用 fedora 11 alpha/beta 版的时候也是巨慢。。。有可能是那个版本的 kernel 或 X 就是有问题的

nihui

1. xauth:  creating new authority file /home/nihui/.serverauth.5419
   
2. 
   
3. X.Org X Server 1.6.5
   
4. Release Date: 2009-10-11
   
5. X Protocol Version 11, Revision 0
   
6. Build Operating System: Linux 2.6.30.10-smp i686
   
7. Current Operating System: Linux MagicLinux 2.6.30.10-smp #1 SMP Wed Dec 9 00:02:03 CST 2009 i686
   
8. Kernel command line: ro root=/dev/sda8 vga=791 quiet splash=silent,fadein,theme:default console=tty1 3
   
9. Build Date: 10 December 2009  12:36:09PM
   
10. Build ID: xorg-x11-server 1.6.5-2mgc25
    
11.         Before reporting problems, check http://wiki.x.org
    
12.         to make sure that you have the latest version.
    
13. Markers: (--) probed, (**) from config file, (==) default setting,
    
14.         (++) from command line, (!!) notice, (II) informational,
    
15.         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    
16. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 10 16:33:36 2009
    
17. (==) Using config file: "/etc/X11/XF86Config"
    
18. 
    
19. (EE) Failed to load module "freetype" (module does not exist, 0)
    
20. (EE) Failed to load module "xtrap" (module does not exist, 0)
    
21. (EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
    
22. (EE) intel(0): Failed to become DRM master.
    
23. (EE) intel(0): Failed to initialize kernel memory manager
    
24. Setting master
    
25. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
26. > Error:            Can't find file "evdev" for keycodes include
    
27. >                   Exiting
    
28. >                   Abandoning keycodes file "default"
    
29. Errors from xkbcomp are not fatal to the X server
    
30. (EE) Error compiling keymap (server-0)
    
31. (EE) XKB: Couldn't compile keymap
    
32. Mouse0 The /dev/input/event* device nodes seem to be missing
    
33. (EE) xf86OpenSerial: Cannot open device /dev/input/mice
    
34.         No such file or directory.
    
35. (EE) Synaptics driver unable to open device
    
36. (EE) PreInit failed for input device "Mouse0"
    
37. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
38. > Error:            Can't find file "evdev" for keycodes include
    
39. >                   Exiting
    
40. >                   Abandoning keycodes file "default"
    
41. Errors from xkbcomp are not fatal to the X server
    
42. (EE) Error compiling keymap (server-0)
    
43. (EE) XKB: Couldn't compile keymap
    
44. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
45. > Error:            Can't find file "evdev" for keycodes include
    
46. >                   Exiting
    
47. >                   Abandoning keycodes file "default"
    
48. Errors from xkbcomp are not fatal to the X server
    
49. (EE) Error compiling keymap (server-0)
    
50. (EE) XKB: Couldn't compile keymap
    
51. AlpsPS/2 ALPS GlidePoint The /dev/input/event* device nodes seem to be missing
    
52. Query no Synaptics: 000000
    
53. (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
    
54. (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
    
55. (EE) config/hal: NewInputDeviceRequest failed (8)
    
56. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
57. > Error:            Can't find file "evdev" for keycodes include
    
58. >                   Exiting
    
59. >                   Abandoning keycodes file "default"
    
60. Errors from xkbcomp are not fatal to the X server
    
61. (EE) Error compiling keymap (server-0)
    
62. (EE) XKB: Couldn't compile keymap
    
63. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
64. > Error:            Can't find file "evdev" for keycodes include
    
65. >                   Exiting
    
66. >                   Abandoning keycodes file "default"
    
67. Errors from xkbcomp are not fatal to the X server
    
68. (EE) Error compiling keymap (server-0)
    
69. (EE) XKB: Couldn't compile keymap
    
70. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
71. > Error:            Can't find file "evdev" for keycodes include
    
72. >                   Exiting
    
73. >                   Abandoning keycodes file "default"
    
74. Errors from xkbcomp are not fatal to the X server
    
75. (EE) Error compiling keymap (server-0)
    
76. (EE) XKB: Couldn't compile keymap
    
77. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
78. > Error:            Can't find file "evdev" for keycodes include
    
79. >                   Exiting
    
80. >                   Abandoning keycodes file "default"
    
81. Errors from xkbcomp are not fatal to the X server
    
82. (EE) Error compiling keymap (server-0)
    
83. (EE) XKB: Couldn't compile keymap
    
84. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
85. > Error:            Can't find file "evdev" for keycodes include
    
86. >                   Exiting
    
87. >                   Abandoning keycodes file "default"
    
88. Errors from xkbcomp are not fatal to the X server
    
89. (EE) Error compiling keymap (server-0)
    
90. (EE) XKB: Couldn't compile keymap
    
91. /etc/X11/Xresources:10:10: warning: missing terminating ' character
    
92. localuser:nihui being added to access control list
    
93. The XKEYBOARD keymap compiler (xkbcomp) reports:
    
94. > Error:            Can't find file "unknown" for geometry include
    
95. >                   Exiting
    
96. >                   Abandoning geometry file "default"
    
97. Errors from xkbcomp are not fatal to the X server
    
98. (EE) Error compiling keymap (server-0)
    
99. (EE) XKB: Couldn't compile keymap
    
100. X Error of failed request:  BadValue (integer parameter out of range for operation)
     
101.   Major opcode of failed request:  141 (XTEST)
     
102.   Minor opcode of failed request:  2 (X_XTestFakeInput)
     
103.   Value in failed request:  0x0
     
104.   Serial number of failed request:  16
     
105.   Current serial number in output stream:  19
     
106. startkde: Starting up...
     

复制代码

nihui

可能的 bug....
Launchpad.net 的报告

https://bugs.launchpad.net/ubunt ... o-intel/+bug/446641
https://bugs.launchpad.net/ubunt ... o-intel/+bug/442197
https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/430876

[ 本帖最后由 nihui 于 2009-12-11 12:48 编辑 ]

sejishikong

原帖由 nihui 于 2009-12-11 00:30 发表
内核降级到 2.6.30.10-3mgc，升级系统后，intel 驱动可以进入，分辨率正常了，但是速度巨慢。。。。比 vesa 还慢好多。。。窗口移动反应慢。。。

但是右下角的屏幕亮度控制可以调节了~ ...

慢就是3d驱动没起来吧，libdrm/mesa?

sejishikong

内核的drm模块,i915加载了没有？